• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

dozer

  1. A

    CAT D6C info

    Gday folks. Looking at purchasing an old D6C bulldozer of a friend of my fathers. He is retiring and looking to offload some gear. Just seeing if anyone can help me with some info. The dozer is Cat D6C. The serial tag on the dash is pretty scratched up. But the one on the left side of the...
  2. S

    D3 Dozer, any help appreciated!

    Hello everyone Just looking for some insight on a 70s Cat d3 Dozer or "Tractor" I just bought. I have recently just bought it though auction and I say 70s because I'm not completely sure the year. I just know from what I have looked up on here that it was before the d3Bs that started production...
    • Skirty
    • Thread
    • clutch break d3 tractor dozer
    • Replies: 3
    • Forum: Dozers
  3. D

    Wheeled dozer with blade/shovel capacity less than 1m3

    hello fellow heavy equipment users, can someone help me locate a wheeled dozer like this ? Specs are in the title, thanks a lot.
  4. N

    JD450c vs Td7e which is better?

    Hey y’all, I would love the forums opinions on owning / working on these dozers (jd450c vs Td7e). I am considering going to look at a 79 Td7e not far from me that is $15k I have mainly been looking at the JDs but know this is similar in size. I am mechanical and work on / own other...
    • Nick350
    • Thread
    • dozer jd450 td7e
    • Replies: 6
    • Forum: Dozers
  5. P

    DIY window screens?

    Anyone here made your own DIY window screens for your dozer? If yes, how did they work out, was it harder than it looks (does not look that hard).
    • pamtnman
    • Thread
    • diy dozer screen window
    • Replies: 46
    • Forum: Dozers
  6. W

    Should I rent or buy?

    Here’s my situation. I’ve bought 10 acres connecting to my parents property, they have 36 acres. There is another 10 acres next to my property that I want to buy in the future. I’ve been clearing trees for the past year, as all the acreage that I bought is wooded. The property is mainly a steep...
    • Wildcat95
    • Thread
    • backhoe loader dozer mini excavator
    • Replies: 14
    • Forum: Dozers
  7. Z

    Case 850b 4bt conversion

    I have a Case 850b that spun a bearing and ended up blowing a decent sized hole in the side of the block. I have a 4bt cummins sitting here and was wondering the cost/ work required to drop it in. I know the newer C's and Ds came with a 4bt so the sizing will be fine. I asssume the bell housing...
    • zswar
    • Thread
    • case 850b dozer engine swap
    • Replies: 6
    • Forum: Dozers
  8. N

    JD450B Steer Clutch Adjustment

    Hey ya'll, I am in the market for a smallish dozer and am considering going to look at a JD450B nearish me (I live in Central TN). He finished the work he needed to and now its been sitting for about a year The owner says the steering clutches and breaks were replaced before he got it about a...
    • Nick350
    • Thread
    • dozer jd450 steering
    • Replies: 11
    • Forum: Dozers
  9. F

    Cat and Deere dozer questions

    Looking at adding a dozer to the farm equipment lineup at some point in the future and had some questions regarding the D4-D6 size range of dozers. 1. What are the advantages and disadvantages of having a high track? 2. Does deere still have transmission issues with their dozers? (Have heard a...
  10. J

    Deere 650G final drive

    I have rebuilt the left hand final drive in my 650g direct drive with the upgraded larger axle. It has eaten the seal out twice since we got it back together in a matter of about 30 minutes each time. Is this likely due to damaged on the axle shaft where the seal sits? The lip was chipped off in...
    • Jakes dozer
    • Thread
    • 650g dozer final drives john deere troubleshootig
    • Replies: 8
    • Forum: Dozers
  11. H

    D7F Timing Injection Pump

    Hello, We have a D7F with serial 61G661. We were told the engine is a D333C. We had the injection pump removed and rebuilt when we overhauled the engine. And now we are trying to get it re-installed and timed with the engine. From what I have researched so far, it takes some special tooling...
    • Hillmaniac1993
    • Thread
    • caterpillar d7f dozer injection pump timimg injection timing
    • Replies: 12
    • Forum: Dozers
  12. A

    D6R transmission issue

    Got a D6R serial prefix 3ZN shifts into neutral sometimes when travelling in forward or reverse. There are 3 active codes, brake pedal sensor, torque convertor output speed sensor and priority valve. Also notice the lights on the dash flash off and on and gauges sweep the same as when your turn...
    • Aaron.ampcon
    • Thread
    • bull dozers bulldozer cat cat d6r cat high track catd6 dozer transmission disengaging
    • Replies: 19
    • Forum: Dozers
  13. J

    1969 dresser td-20e troubleshooting help

    I have a 1969 dresser td20e bulldozer, everything has worked fine for the past three years. Recently the right lever doesn’t make the machine turn to the right in fwd or in reverse. Where should I start troubleshooting first? Adjusting the levers/links or is it probably the clutches or brakes...
  14. H

    Case 450 Injector Knowlege

    I have a case 450 Dozer S/N 3065239 According to the parts manual for the dozer of my S/N range with 207D engine it shows i should have Injector 140828 Stamped 20673, RPL A140827 so i am assuming that means that the replacment part it 140827. By chance what would happen if i put injector A140829...
    • Hayden903
    • Thread
    • 188d 207d dozer injectors
    • Replies: 5
    • Forum: Dozers
  15. J

    JD 555G warning light question.

    So I finally found a track loader, in fact I've had it almost a year now. It's a 555G and I love it. It runs and operates great. But now I do have a warning light that comes on and stays on for the most part. It is the "TRANS OIL FILTER" light. It goes out at times but mostly stays on. Can...
  16. U

    Cat 3204

    Anyone near North Dakota have a 3204 for sale? 953 launched mine
  17. P

    D6H transmission overheating

    Hi all, Trying to sort out an overheating transmission on a D6H Serial No. *2KD00564* for a buddy. The history of the machine as I’m aware of it is as follows: He bought the machine, put it on his lowbed, and when they tried to offload it, catastrophic clutch failure in the transmission...
    • Pralhad Birdi
    • Thread
    • bulldozer d6h dozer transmission
    • Replies: 123
    • Forum: Dozers
  18. P

    D6NXL operator seat sensor

    Anyone know how to bypass seat sensor in a 2019 D6NXL so it thinks operators present? Sensor is bad and it’s not a cat product trying to see other options other than buying whole new top half of seat.
  19. Girth_Brooks

    4 Way Blade Adjustments

    We have a komatsu 65ex with 4 way blade and had the arm, with hoses, slip off a couple times before i got it tuned in. Should the 2 tie rods, from arm to back middle of blade, be pulling in to hold everything square or maybe relaxed. I feel like im missing something.
    • Girth_Brooks
    • Thread
    • 4 way blade 65ex-15eo blade issues dozer komastsu
    • Replies: 8
    • Forum: Dozers
  20. A

    Decode CAT Serial Numbers

    I do not have access to SIS. I am needing to know the specs on my two D6H dozers. I don’t know what year they are or any info like that about them. Serial numbers are 3ZF00871 and 4RC02265. Thanks!
    • Aburkett17!
    • Thread
    • cat dozer serial lookup serial number serial number decoder serial number lookup
    • Replies: 1
    • Forum: Dozers
Top