Newbe here..bought d4c hystat think series 2 or 3, blade wont go into float, dont feel a detent on control, thinking little grey button below hi/low selector on direction joystick, left side joystick, mite need to be pressed but it dont help, am I thinking right or is it in blade control with a detent like most machines?
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
D4c blade float won't work
- Thread starter Harry88
- Start date
Nige
Senior Member
No Operation & Maintenance manual in the pocket behind the seat I take it.?
Post a Serial Number and the correct one can be identified.
They are about $50 to download from Cat - probably the best $50 you'll ever spend.
Post a Serial Number and the correct one can be identified.
They are about $50 to download from Cat - probably the best $50 you'll ever spend.