Look under the fitting that the hose is hooked on there should be a 22mm bolt head .Take the bolt out should be a filter in it. If you haven't done so already blow hose out.Yes, but it wasn't bogging down all that much last weekend when I took those pressures. Last time it was on a job and it was really hot it was bogging down a whole lot more. At one point I was almost positive the engine was about to stall out trying to track up an incline. Not an insanely steep incline either. The tri axle went up and down that same incline a bunch of times without any problems.
Hmm, that's the hose I already checked but it wasn't a banjo fitting. It was just a rubber hose pushed onto a metal nipple with a hose clamp holding it. This machine doesn't have the water separator. Could that be why it's different?
Bob