mike s
Member
After see your vid Im mad! I had a chance to buy one for $7500 and didnt buy it!
Sorry about the comment do you have the backhoe for it it's a pretty big machine for a bobcat
D11RCD: Attached for your viewing pleasure... =) *hopefully this works... my first photo upload. :bash
My main problem with the machine at the moment is that after about 10-15 minutes of continouous driving on a paved road, it drops from high gear into low gear, and I cant get it into high gear again until after it has cooled off for a couple of hours. I told it to the mechanics that changed my hydraulics line, their thought was that maybe one of the hydraulics valves wasn't closing properly, continuously cycling hydraulic oil around the system, heating up the oil and thus making the machine go into low gear. Any thoughts on that?
Hi my name is Kevin and I have a 2410 but I have been all thru the parts and repair books replaced my perkins and done a lot of fixing on my old bobcat and I would say that the solenoid for the hi gear is bad or the electric switch in the steering valve housing is badhop[e that helps