Ronsii
Senior Member
- Joined
- Jun 26, 2011
- Messages
- 3,464
- Location
- Western Washington
- Occupation
- s/e Heavy equipment operator
We got a job that will require making these column bollards look better... they have been hammered by forklifts for the last 20 years or so... they still have the sonotube on them from when they were poured... it's torn up in spots and they cut the 36 inch by 72 inch tall sonotube in half down the length then spliced it with a 6 inch strip of sonotube cardboard down the side with screws...which leaves a big long 1/4" indent... and the actual pour looks like they didn't really vibrate or even tap the tube much if at all.... forgot to get a close up pic...
So I was wondering if anyone here has done something similar to cover/coat these things??? to make them a bit more aesthetically pleasing or just any ideas of what might work to wrap them... plastic, metal, etc...??? Any thoughts would be greatly appreciated
So I was wondering if anyone here has done something similar to cover/coat these things??? to make them a bit more aesthetically pleasing or just any ideas of what might work to wrap them... plastic, metal, etc...??? Any thoughts would be greatly appreciated