hillside876
Member
I have a 2014 Jcb 3cx that's starting to give some random issues. first, it was return line restrictions,( fixed by replacing the injector return lines). Next, it started having problems starting, I would prime the lift pump by turning the ignition on and off about 3 times to make it run. third, the lift pump started sticking so I replaced it and replaced all the fuel filters. Since replacing the filters and lift pump the machine no longer starts without a quick starter being sprayed in the intake.
Once started the machine will work if I keep the rpm under 2000, once I get above 2000 it shuts off and will only re-start with a quick starter immediately after shutting off. I didn't see any visible leaks, I'm assuming it might be an air leak but I can't pinpoint it.
Once started the machine will work if I keep the rpm under 2000, once I get above 2000 it shuts off and will only re-start with a quick starter immediately after shutting off. I didn't see any visible leaks, I'm assuming it might be an air leak but I can't pinpoint it.
