• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

backhoe

  1. M

    Case 580B missing parts from main relief valve.

    Hi, First post here. I have a Case 580B and the main relief valve for the loader control is missing parts. I spoke with Case, and they said they no longer make those parts. My question is: Is it possible to add a remote to the loader control valve and if so, would it matter if the main relief...
  2. G

    JD 710G BACKHOE FUEL INJECTION PUMP ISSUES

    HELP lttle to no fuel coming out of the injection pump on my 710G the fuel sock has been changed the primer pump has been changed the tank has been rinsed out and cleaned it seems like the only2 injector lines on the left side bottom of the pump havie a little fuel coming out of it. It looks...
  3. M

    Case 580C Backhoe Control Valve reseal....

    I have a 1979 Case 580c backhoe that is leaking oil at the top end of the backhoe control valves. (just weeping). Otherwise the hoe works fine - sometimes although the left swing cylinder is 'weak' and requires slight operation of one of the other controls to get power to it. Choices are to...
  4. D

    Help Needed: Case 580C Won’t Crank

    Hello Friends, Was out running the Case 580C yesterday and after taking a break I got one click of the starter then no crank thereafter. Had good battery voltage and fuel. Noted the power wire circled in the attached picture to the starter has a break in the casing. After playing with the...
  5. D

    Help Needed Power Shuttle Leak Case 580C

    Hello Friends, Any idea what this is that’s leaking hydraulic fluid on the side of the power shuttle trans for Case 580C backhoe? Think it would need a new gasket or part replaced? Thank you!
  6. P

    Cat 428 3054 engine spurting oil from dipstick

    Hi all, I’ve got a 428C backhoe with a retro-fitted 3054 engine Serial No. 7BJ46984 in it. Originally had a NA engine in it which broke a rod, and I picked this up on the cheap so stuck it in. Its got a couple of issues basically: - I’ve changed the turbo on this engine 3 times, and they keep...
  7. D

    Help Needed: Case 580C Backhoe Loader Missing Pin?

    Hello Friends, New to me Case 580C backhoe loader has a hole in the backhoe loader arm. (picture attached) Could someone help me identify the part or possibly part number that goes here? Looks like it would be a pin/bushing but not sure so any thoughts to help get the part would be appreciated...
  8. J

    Case 580 Super L transmission issue?

    I have a case 580 super L 4x4 backhoe that I bought and have been cleaning up. Was using it and worked fine for 30+ hrs I had been running it. Was driving home from a job and was driving about 20(+/-) mph in 4th gear on pavement and all of a sudden I lost power to my transmission/driveline. No...
  9. R

    Case 580sm outriggers move very slow

    So I have an 07 case 580sm series 2. It’s got pilot controls in the back. Just yesterday my outriggers started moving extremely slow. One of the has a recent rebuild the other is getting one done now. i am looking for ideas of what it could Be. I plan on draining the hydraulic tank and...
  10. F

    JD 110 Backhoe question

    Greetings I bought a John Deere 110 Backhoe loader last year. I have 40 acres I tinker around on. My reasoning for the 110 was the integral backhoe and 3 point hitch option. The problem I have, or at least I think I have, is Ive never removed the backhoe but the 3 point upper arms seem to be...
  11. K

    Antique Case Hydraulic Pump Upgrade

    Hello everyone, Looking for those who are more experience with this sort of thing than I am. My 1963 Case 530 Loader/Backhoe just pushed the seal out of the hydraulic pump: typically a strong indication of a worn out pump as I understand it. Can anybody verify that? Now of course this pump was...
  12. A

    Komatsu wb93r-5 backhoe overheating

    Got a overheating issue on this machine, shuts off when hot and wouldn't restart till cool down, seems hydraulic is hotter than normal aswell, thermostat was removed to no improvement. What should I look at?
  13. A

    CASE 580G - request for advice.

    Hi everyone, I recently bought my first TLB or as the rest of the world calls it, backhoe. It is a Case 580G that was sitting for a while when purchased but I have been putting in work repacking cylinders and changing hydraulic hoses etc. trying to bring it back to its former glory, but it has...
  14. C

    Need advice: Case 580K Backhoe Transmission (phase3) Any information or knowledge is appreciated!

    We have been reconditioning a Case 580K backhoe and could use some advice & input from anyone knowledgeable on the phase 3 model. This is the newer style 580k and it’s very difficult to find information or experience on this model. Seems like everything pertains to the original 580K. The...
  15. Roosterw9

    New to HEF

    Hello all , I’m a new member to hef , after a couple of years of acquiring answers here for various projects I figured I would join too seek and share some knowledge , Is anyone on here in British Columbia ? I just purchased a 1975 case 580B ck and am having the power shuttle issues , It was...
  16. C

    Buying advice for old Ford backhoe

    Hello, I have decided to buy a backhoe that I could use on my private property. At first it would be used to help with digging and lifting while building my house but hoping to find something that I could keep for years to come. I have gone through many forums and overall looks like old Ford...
  17. N

    555e brakes building pressure while using

    About a year ago I installed 2 new master cylinders on my 98 555e. We reused the connecting tube that goes between that master cylinders. Over the past 6 months the brakes will start to build pressure while using and start grabbing. I park the machine and break free one of the lines on top of...
  18. D

    Terex TX760B Engine Fault Light

    My Terex, TX 760B has an engine fault light on. I topped off the oil, transmission fluid, hydraulic fluid, blew out the air filter. I still have the light coming on. Has anybody experienced this? Please help as I have a good size project on my property that needs to be completed. I’d also be...
  19. F

    Cat 304E2

    I’m trying to decode year on a machine that was offered to me, it’s a Caterpillar 304 E2 Serial # *CAT0304/EME405060* I’d like to make sure it is not stolen and year if someone can please help!!
  20. N

    How To Change & Tube Backhoe & Tractor Tires

    Hey ya'll I am back with another how-to video, this time documenting a tire change on our Ford New Holland 555E. We had a local tire repair guy come out and swap them while showing us the ropes. I highly recommend Darrel's Tire Repair in Shelbyville TN. All that being said I am not an expert...
Top