dragracer5256
Active Member
Im sure this has been covered but I couldn't find a thread that pointed me in the right direction. This will be simple for many. Alrman?
#1 tilt bleeds over - I have rebuilt cylinder's and caped off to verify cylinder's not leaking, so im looking at control valve. I assume, from what ive read, pull check valve for that side first?? If no dirt replace? If so where to buy? Or im all wrong?
#2 trans spool leak - Correct way to remove spool and best place to buy seal kit ? I cant find it on Coleman`s site.
And one more question, my aux valve near feet is leaking where spool goes in. Is this simple fix?
Thanks in advance for the help. Im just trying to get all these little aggravation issue fixed while this tractor is in my shop. Fixing things on these tractors is so much easier with expert directions.
#1 tilt bleeds over - I have rebuilt cylinder's and caped off to verify cylinder's not leaking, so im looking at control valve. I assume, from what ive read, pull check valve for that side first?? If no dirt replace? If so where to buy? Or im all wrong?
#2 trans spool leak - Correct way to remove spool and best place to buy seal kit ? I cant find it on Coleman`s site.
And one more question, my aux valve near feet is leaking where spool goes in. Is this simple fix?
Thanks in advance for the help. Im just trying to get all these little aggravation issue fixed while this tractor is in my shop. Fixing things on these tractors is so much easier with expert directions.
Last edited: