• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

transmission trouble

  1. Vcutter

    D9H Transmission Issues

    My D9H, 90V9144, won’t move. Machine began to hesitate shifting f to r, then ceased to move. Checked pressure of tans pump and it was 420 at priority valve on front of trans, 0 on P1 and 110 on P2. Checked mag screen and it was full of aluminum as was oil, I removed and replaced torque as it has...
    • Vcutter
    • Thread
    • d9h transmission problems transmission trouble
    • Replies: 17
    • Forum: Dozers
  2. B

    JD310 SE Tranmission - After heavy use will slip out of gear or not engage

    Hi, I've put in about 25 hours since purchasing this JD and for most use, in close areas, I have no issue going into FWD and REV. On Friday and today I've been moving crushed rock to another area of my property (about 1/4 mile drive) and the issue will appear. Normally I'm in 1st gear and 4x4...
  3. micke

    Champion 730A -96

    hello, i got a champion 730 and i have some trouble, the engine is filled up with transmission oil, i have changed The transmission oil pump but the trouble remain. I need some advice. Thanx /// Micke
Top