• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

skid steer

  1. R

    CAT 277B Panel Lights Not Working

    A few months ago I was having some electrical issues (I was melting batteries and the machine wouldn't start). Long story short, it was a bad alternator. However, during the process of trying to diagnose that issue, my panel lights also kept blowing their fuse. So like an idiot I tried putting...
  2. E

    Mustang 940 starting issue

    Hey guys new to this forum and this skid steer it's a mustang 940 with a yanmar diesel. I purchased it about a month ago and it ran great started easily. It's got 1300 hrs on it. This weekend I decided to do a fluid change and service cause the seller told me it had been sitting for about 2...
  3. D

    New Holland skid steer fault code 1051

    My 2012 New Holland skid steer won't start won't even turn over and is throwing fault code 1051 please help
    • Diljjohn
    • Thread
    • fault code 1051 l230 new holland no start skid steer
    • Replies: 2
    • Forum: Wheel Loaders
  4. Billy Bob Deluxe

    2004 Caterpillar 216B No Auxiliary Hydraulic Flow

    I recently bought an angle blade, that I saw working prior to purchasing, but cannot get any auxiliary hydraulic flow on my 2004 Cat 216B, 0216BERLL00474. I purchased the OMM and tried the sequence suggested in there and also tried the Hydraulic Lockout switch as suggested in another similar...
  5. A

    t595 loosing and regaining hydraulic function

    Hello, I have a 2016 t595 that I purchased to use around the farm. It was recently serviced by bobcat and has been running great. A few days ago, I topped off the hydraulic oil, just under the red line. I went to use it today, engine starts just fine, I press the green button, turn the throttle...
  6. B

    2006 Cat 277B Electrical Problems

    I bought this machine about 2 months ago and it ran great. About 2 weeks ago I got into it to do some work and it was dead. I hooked my truck up to the battery and the power and guages came on but it just clicked when I tried to start it so I assumed the battery was totally dead. Went ahead and...
  7. Ace Al

    Terex PT110 forester hydraulic not working properly

    I have a 2015 Terex PT110 forester with about 3 thousand hours on it. Once in operation for an hour or two, the hydronic system stops working. Cannot move the arms up or down, also unable to go forward or reverse the machine. Nothing happens when moving the joystick; no winding down of engine...
  8. J

    2017 case sv185 no glow plug light

    I recently purchased a 2017 case sv185 skid steer and it killed while using, now the glow plug light won't illuminate and no start, 1800 hours, I'm new to skid steers, not sure where to start
  9. B

    Kubota SVL 90-2 Error Codes, wiring issue?

    Hey guys, i have an SVL90-2 throwing multiple codes, E-9100, E-9102, E-9107, E-9109 I contacted the local dealer, and the "technical support" thought its probably a wiring issue but weren"t able to point me in any direction of where to look. I looked over the wiring that i could see without...
    • Bradley Martin
    • Thread
    • 90-2 error codes fault codes kubota skid loader skid steer svl svl90-2 wiring
    • Replies: 1
    • Forum: Skid Steers
  10. M

    Accommodate disability with skid steer controls

    I'm contemplating buying a skid steer. I don't have a left arm, thus I can't use a left joystick. A Kubota mechanic modified my Kubota KX04-4 mini-excavator moving the joystick controls to the floor. All of the stock hydraulics were used, with only one hose requiring an extension. It works well...
  11. S

    Cat 226b skidsteer, parking brake and seatbelt lights on (not flashing)

    I have a cat 226b skidsteer and after doing some work I turned it off but when I went to fire it up, it wouldn't start, I noticed the seat belt light won't turn off when I put the bar down. Note: the seatbelt light is not flashing it stays illuminated.
  12. Sharkproof

    Case 1845c Skid Steer Ripoff?

    I recently bought an 1845c at auction based on video, pictures and it's reputation as being "bulletproof". The seller disclosed a hydraulic leak, but claimed unit was operating properly. (I did notice after the fact, that in the video demo the driver only made left turns). Well it turns out...
    • Sharkproof
    • Thread
    • 1835 1840 1845c bobcat case deere gehl skid loader skid steer
    • Replies: 28
    • Forum: Skid Steers
  13. C

    A FYI Fix for CAT 236b that has good Batt, but won't start, just Clicks.

    Yesterday, had a job to do. But CAT 236b Skid steer decided for some reason to not start, just click sound. Battery tested fine, and is trickle charged nightly. Assume the seat or restraint sensor was causing this. Checked all relay connections, opened and reseated. bounced up and down on seat...
    • CATastrophic2
    • Thread
    • battery cable disconnect cat 236b click restraint sensor seat sensor skid steer won't start
    • Replies: 2
    • Forum: Skid Steers
  14. Seans problems

    Has anyone here made their own sod cutter?

    We have an 18" ryan sod cutter from 1988 thats a push behind but sometimes I think about modding one of our skidsteer buckets and adding a blade and roller to take out more faster. It'd save so much time and money. Has anyone done anything like this?
  15. J

    New Holland LS180.B how to set timing

    After removing injection pump to replace broken bolts holding it on, my ignorant self did not pin the pump when removing. After NUMEROUS tries of moving pump installing and moving. I still can’t get it to run. I have service information for an LS180 but the 180.B has different engine. The...
  16. T

    Bobcat s70 bucket curl sticking

    I had an s70 come in with a leak and bucket curl function sticking. The leak was from the bucket curl spool seal. I removed valve and resealed the valve. Did not notice any damage to spool or bore. I put everything back together and the bucket curl function was still sticking. I noticed that the...
  17. N

    Cat 246 skid steer starting issues

    Older 246 skid steer. Keeping it short and simple, had a fuel issues so I changed lifter pump and was able to get full fuel pressure and was able to get it running (using either) and it ran fine for a solid 8 hours (also put fuel additive in) Parked it and didn’t touch it for 7 days, fired it...
  18. Barnlofter

    2004 Takeuchi TL140 fuel stop solenoid

    I just bought a TL140. My first track loader. The last owner put a pull cable to the cab and bypassed the fuel stop solenoid. i would like to go back to all original set up. My first issue is accessing the lower right side of the engine where the kill cable goes and the fuel stop solenoid...
  19. S

    257d turns to right on startup

    Hi everyone, we have a 257d skid loader. As soon as the machine is started, it will begin turning itself to the right. The only way to make it stop, is to release the parking brake and wiggle the left joystick. Wondering if anyone has come across this before. Problem seems worse when machine is...
  20. K

    LX565 operation? New owner!

    Hey All, Does anyone have an LX565 operators manual you can share with me? I am brand new to skid steers and bought this machine to fence our new 5 acres with a used danuser SM40 I should be picking up this week. But I barely know how to move this new machine around! These forums helped me...
Top