• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

problem

  1. FaktorII

    2016 Case excavator cx80c tracking problem

    I’ve got a problem that keeps showing up with my tracks. Machine won’t turn when both sticks engaged. Each side works fine by its self but as soon as I try to turn slow and engage second side tracks just almost stop. If I engage both tracks straight or back all the way it will track forward or...
    • FaktorII
    • Thread
    • case case cx80 cat excavator help kobelco kubota problem tracks
    • Replies: 5
    • Forum: Excavators
  2. A

    Yanmar VIO55-6a swing question

    Hope this is in the right thread, I’m new here. Anyways, My 2017 yanmar has a hiccup in its swing. Sometimes when I start the machine it won’t swing. When I bump the stick toward the machine it will then swing normally. What kind of problem do I have going on here?
  3. G

    Oil lamp + hydraulic «studder»

    Cat 302.5 ca. year 2000. Bought the machine used. 3000 hours. Installed new filters and new oil, both engine and hydraulic. The issue: Hydraulics «studder» real hard, and the oil pressure lamp lights up at the same time the studdering goes on. Seems to change a bit when I change the idling...
    • Govt
    • Thread
    • hydraulic lamp problem shaking
    • Replies: 8
    • Forum: Excavators
  4. F

    D5H pressure and brake problems

    Hello, I need help. My D5H series 8rc01384 damages the Teflon seals on the controls and the discs end up with paste on both sides, the pressures go off in P1. We transit approximately 17 km from the highway to the job site. It began to present a fault in the control, it was braking, so we...
    • Felipe82
    • Thread
    • d5h pressure problem
    • Replies: 0
    • Forum: Dozers
  5. F

    Electric Problem Cat 924gz

    Hello, I have a problem with a CAT 924gz series rta00614, the machine was working normally, they stopped it and then it won't start anymore, there is no electricity on the board and the ignition key, could it be a relay? Thank you so much
  6. G

    Cat 226b2 Skidsteer Left Joystick problem

    Hey, I'm new to the forum, and I'm in the market to buy a skidsteer. I'm in contact with a guy a few hours away who has a 2011 226B2 with 2700hrs. Says everything on the machine operates like it should, they replaced the fuel pump and injectors 2 years ago. Sounds like everything drives...
    • GarrettJ
    • Thread
    • buying cat caterpillar fix help hydraulics issue joystick problem
    • Replies: 2
    • Forum: Wheel Loaders
  7. J

    Case 688 Hydraulic Issue

    Hi, I read through the threads and saw nothing like the problem that I'm having. I have a 89 Case 688 excavator that I bought used with hydraulic issues. The previous owner was tracking across a field when the unit just shut off. It lost electric power. He found a bad circuit and ran a hot wire...
  8. A

    Cat 259d Aftertreatment alarm

    hello my 259d FTL01273 2600hrs is giving me code 523602-0 excessive regeneration frequency thats when it trys to do a active regeneration within 30 minutes of each other ( I have ET) what should i be watching on engine status to figure out whats triggering a regeneration? attatched is some...
  9. B

    Bobcat T 770 High Flow Hydrolic problem

    My T770 keeps jumping out of high flow. In the mornings when the hydraulic fluid is cold the high flow runs find and than after about 30 minutes is will jump out of high flow and will not go back in. Time after time and i am running a mulcher head. Does anyone know why it keeps jumping out of...
  10. Blackrock

    Excavator tracks locked!

    Hi, I just bought nice O&K RH City Cityline that I'll use on my farm but I have problems with both tracks that don't twist. This excavator was left by the ex owner on a quarry for maybe 6 mounths without using it and the track became locked. Do you have any solution to solve that without...
  11. TEX32

    Cat 3306 - Part # 8M4448 O-ring mystery ???

    Morning gents. Have a mystery here. Doing a head gasket job on a Cat 3306 ( Ser # 6NC17941 ) in a D7R ( Ser # 2EN01011 ) Installing rocker shaft assembly, and have an o-ring in my possession ( Part # 8M4448 ) that is supposed to be installed under #6 rocker shaft pedestal. However, there is NO...
    • TEX32
    • Thread
    • 3306 cat d7r dozer engine gasket head issue problem
    • Replies: 16
    • Forum: Dozers
  12. E

    Volvo EC210

    I have a Volvo EC210 that I am having issues with the display unit in the cab of the excavator. None of the functions work on the display, once I press a button none of the lights show up like they should. The whole display unit does not seem to be receiving power, I have checked the heater fuse...
    • Eliot Evans
    • Thread
    • display electrical heater problem volvo 210
    • Replies: 3
    • Forum: Excavators
  13. F

    Fiat-Hitachi FB100 backhoe hydraulic problem (?)

    Hello guys, I´m writing from spain, my name is Tomás, and I found this excellent forum searching internet for help with the problem (if it really is one) of my backhoe. It´s a 1999 Fiat-Hitachi FB100 with about 10.000 working hours, and I think this is very similar to some New Holand and Case...
  14. J

    JCB 214 hoe trouble

    Hi I have purchased a used JCB 214 and used it for first few months with no real trouble. Lately I have been having trouble with the hoe. It has the switch and button by the dash. To activate the hoe you toggle switch down and push button. Hoe engages. Well lately the hoe will just stop...
  15. A

    CAT 432D front clamshell problem

    Hi Everyone, I'm from Ukraine, and my English not so good, sorry for this. I have a problem with front bucket clamshell on my CAT 432D (2001 year): Every morning when I start to work the clamshell works perfect. But in the afternoon, when I turn off the engine, take a lunch and then start to...
  16. J

    NEED HELP removing the drum rope wedge

    Okay any advice will be greatly appriciated. Had my main hoist line break today and I cant get the wedge out to release the remaining cable. I drove a bar down thru the opposite end to force the wedge out but the bar wasnt long enough and is now stuck. Any tricks of the trade that I can do to...
    • Jswick
    • Thread
    • drum hoist line main problem spooling unspooling
    • Replies: 3
    • Forum: Cranes
  17. D

    Takeuchi TW 80 goes into reverse on its own

    Hey everybody, My father in law has a 2010 (I believe that's the year) takeuchi tw80. It has been acting up a lot. It will throw into reverse all of the sudden while going forward. The only way to get it out of reverse sometimes is to ride it in reverse for a bit then try putting it back in...
    • Danny0325
    • Thread
    • forward issue malfunction problem reverse rubber tire takeuchi transmission tw80 wheel loader
    • Replies: 5
    • Forum: Wheel Loaders
  18. P

    2001 JD 750C LGP problems. Please HELP!

    Hello all! I am new to the forum and relatively new to owning a 2001 JD 750C LGP dozer with around 12,780 hrs. 1st problem: Started two days ago. Dozer works like a champ for first 30 minutes of day and then goes into "Slow Mo" mode after warming up. Blade hydraulics (6 way) do not slow down...
    • powerplusdude
    • Thread
    • 750c dozer help john deere problem
    • Replies: 10
    • Forum: Dozers
  19. F

    JCB JS160 problem, won't start

    I have a 2008 JCB JS160 tierIII and it got 6800 hours. I have owned it 7 months now and had a few fault codes, mostly damp days, nothing serious yet. Today i washed it with pressure washer to clean it before service. After i let it dry few hours i had two new fault codes and engine won't fire...
  20. R

    This JD 450H problem made 2 Deere service managers scratch their heads!

    Out of the blue I started my JD 450H and when I put it in forward it would not move. Same thing with reverse but after a minute of so it eventually started to move erratically. Left track moved right track did not. In about a second the right track moved and the left did not (steering left right...
    • rvn336pf
    • Thread
    • hydraulic problem tracking
    • Replies: 7
    • Forum: Dozers
Top