• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

genie man lift

  1. H

    2001 Genie GS-2668-RT Runs then dies and Lift will not work.

    We bought this 2001 Genie GS-2668-RT Scissor lift (GS68-40644) Replaced ECU & Hand Controls rebuilt by Hindley Electronics Will start gives no Codes, then dies immediately. Every single function works Except lift and dying. If I power the fuel pump and fuel switch on the bottom of the...
  2. A

    Please help a newbie! Genie Z-60/34 turntable only rotates in one direction

    First and foremost, thank you so much in advance! I'm a hobby rancher who purchased a 2003 Z-60/34 Genie Manlift sight unseen from an auction, knowing there were some risks involved. Welp, it got delivered today and drives, turns, goes up/down mostly ok. But, when trying to rotate/spin she only...
  3. S

    Genie Z60/34 4 wheel drive issue

    I have a 2005 Genie Z60/34 serial # Z6005-4938. While using lift yesterday, I almost got it stuck. Going up small hill and came to a stop. Started to move again and only left front wheel would spin. Have not started to diagnose yet. Wondering if someone out there has seen this issue and can send...
  4. U

    Genie Z45/22 Platform levelling issues

    When I first start it moves very very slowly back and forth. Then it stops doesn’t move until next day when I first start up working for a few minutes. Everything else on the machine that is hydraulic works. I checked the directional solenoid, it seems to work, I also checked the normally closed...
  5. J

    Genie Z60 Travel Issue

    I have a 2000 Genie z60/24 dual fuel which will driving fine Except it does not seem to have any drive torque to climb up the ramps of my tag trailer, The original horsepower board voltages remain around 12 vts (2 and 10) and was not able to adjust voltage per manual. Purchased a new upgraded...
  6. M

    Genie z25/45 Basket Rotation Stuck

    Hello, I'm working on a Genie z25/45. When using the basket rotation switch, sometimes the basket would rotate all the way to the right, and I then would not be able to rotate it back to the left at all. Every now and again I would start it and it would almost magically move back to the left...
  7. B

    Genie TZ34/20 Motor Controller

    I have a Genie TZ34/20 that is having an issue with the motor controller. I got a new one in the mail and installed it. It ran for about 20 seconds then it stopped and hasn't worked since. I'm at a dead end on this. Hopefully someone here can help.
  8. M

    Genie Z45 drive inoperable

    Good day all! Newbie to the forum I’ve got a Genie z45/25 S/N z452506-28022. This this is making me pull my hair out a bit. All functions work but drive won’t work, I’ve calibrated joystick, also tried another joystick and still no luck. I’ve noticed some corrosion on the pins at the ALC500...
Top