• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

genie electrical problem

  1. H

    2001 Genie GS-2668-RT Runs then dies and Lift will not work.

    We bought this 2001 Genie GS-2668-RT Scissor lift (GS68-40644) Replaced ECU & Hand Controls rebuilt by Hindley Electronics Will start gives no Codes, then dies immediately. Every single function works Except lift and dying. If I power the fuel pump and fuel switch on the bottom of the...
  2. J

    Genie Z60 Travel Issue

    I have a 2000 Genie z60/24 dual fuel which will driving fine Except it does not seem to have any drive torque to climb up the ramps of my tag trailer, The original horsepower board voltages remain around 12 vts (2 and 10) and was not able to adjust voltage per manual. Purchased a new upgraded...
  3. Z

    Genie TMZ 34/19 Electrical Problem

    Hello all, I have a Genie TMZ 34/19 with hydraulic outriggers, serial number after T3402-115. I believe I'm chasing an electrical problem, I say "believe" because as the ground control and platform panels do not lower the outriggers at all, I'm a bit stuck. Until the outriggers are down...
Top