• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

crane

  1. I

    Just bought a 300 Ton Liebherr need support near Topeka!

    Hello all I just bought a Liebherr crane for a contract we have in the state of Kansas. First time crane owner. If you guys know of any support techs or hose and rubber places near Topeka please let me know its a 2002 model and i know we will be having to replace parts and hoses as we go. I am...
  2. H

    Tracked machines

    Having wet weather already in full effect this season I am looking into other solutions for getting around my sites. We currently run skytrak 6036 and our sites Are primarily clay soils around the whole yard with the exception of the driveway that is filled with sand when we get there to start...
  3. H

    Load out chart for Manitowoc 4100W

    Does anyone have a breakdown / loadout chart for a Manitowoc 4100w that they could share? If so, could you please send me a copy? [email protected] Thank you in advance.
  4. G

    Sumitomo LS118RH Crawler Crane's boom limit switch

    This crane's boom raising limit switch had been removed a few years ago and they have been operating it without the switch. Now they've asked me to install a new switch. I found a four core cable that was taped at the end. There were 3 negative wires and 1 positive wire. I tried to figure out...
    • Ghashaan
    • Thread
    • boom crane direction valve
    • Replies: 2
    • Forum: Cranes
  5. usedcranes

    Anyone can help me with my questions of Tadano cranes please?

    Hi there, I want to buy a Japan made Tadano crane. I checked some cranes already, but I do not know much about cranes. I saw a yellow Tadano 30 ton crane which looks old but works well. can anyone tell me the approximate manufacturing year of a Tadano 30 ton crane? How to inspect it? Thanks a...
  6. K

    three new Vids from Vienna

    Best greets from Vienna
    • KranWien
    • Thread
    • crane cranes kran kranfahrer kranwien tower crane
    • Replies: 4
    • Forum: Cranes
  7. K

    what a zoooooooom

    watch :)
    • KranWien
    • Thread
    • crane cranes kran kranfahrer kranführer kranwien lumix towercrane vienna zoom
    • Replies: 0
    • Forum: Cranes
  8. J

    Grove RT865B tele. cylinder repair

    The bottom cylinder of this grove is leaking pretty bad so we pulled the boom (the three sections are still together on the ground) and put it on blocks. Looking at the cylinder the nut is recessed so slapping a big pipe wrench on it isn't an option yet. Any advice would be a big help.
    • JimmyFL
    • Thread
    • crane cylinder grove
    • Replies: 3
    • Forum: Cranes
  9. E

    drott 2500cc outrigger moving when boom raised or lowered

    I am hoping to find some assistance with a Drott 2500cc crane Recently 1 of the outriggers started moving with the boom. If beam is selected the outrigger moves in and out as the boom is raised or lowered if float is selected the foot on that same outrigger raises and lowers with the boom. I...
    • Ed B
    • Thread
    • crane droitt outriggers safety troubleshootig
    • Replies: 6
    • Forum: Cranes
Top