• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. D

    950 Cat 8Tk05288 full warning lit up

    number is 1356644 or reman OR6969. I feel like its the control box in the dash behind the instruments The gauges on the left move but are pinned to the max and most of the warnings are lit up with buzzer and flashing
  2. D

    950 Cat 8Tk05288 full warning lit up

    Ok so I got back to it and it seems the ground is ok ? I did find a couple things I was able to correct . I now am thinking the gage module is the problem ? I checked the price at Cat , 8500.00 !!!!! So now I need to verify if the module is in fact bad ?
  3. D

    950 Cat 8Tk05288 full warning lit up

    That's very helpful , a great BIG THANK YOU !!!
  4. D

    950 Cat 8Tk05288 full warning lit up

    Happens as soon as key goes on and stays lit up until key off . I never like to run open master , I can flip it to see if it reveals something ! Thank you Nige for the help !!!! I wonder where the system monitoring module is ? Seems ungrounded ?
  5. D

    950 Cat 8Tk05288 full warning lit up

    I'm back with a full panel warning ? Seems that its electrical ? Gauges are pinned to max most all lites on ? Nothing is wrong with the operation of the machine . Almost feels like a bad ground ? Not sure where the cluster gets its ground from ? Tach is fine Hr meter is fine , warning system is...
  6. D

    Cat 225 hydraulic issue

    When i engage the bucket cyl and the stick cyl at the same time partial stroke the machine seems to bind and relief valve howls. It doesnt do it every time ? Thanks for the consideration !
  7. D

    Cat 225 hydraulic issue

    When I crowd in and and curl the bucket in at the same time a relief valve stalls and things seem stressed ? If I carefully use one function at a time it passes and runs normal , maybe a bit of valve strain but not always ? Not sure if I should begin on the distributor ,the swivel or controls ?
  8. D

    CAT 307 Swing Gearing Vent?

    I notice your in mass , If you determine the motor is leaky take it off and Northland and Willette in Plainville,ma will rebuild your motor with all cat seals . I'm sure your familiar with Milton , they get it done too . I prefer the personal experience at a smaller shop ?
  9. D

    CAT 307 Swing Gearing Vent?

    I am referring to the swing drive hydraulic motor . If the front shaft seal fails oil will likely enter the gearbox and begin overfilling . The chamber in the 307 is small so a small leak will change the level fast . Water intrusion can also raise a fluid level , not that easy but possible...
  10. D

    CAT 307 Swing Gearing Vent?

    If the motor has lost the front seal it can push fluid in to the rotator gears and cause overflow Easy test ,pop the motor with lines still on and try it , leak will be obvious
  11. D

    CAT 950 F II hydraulic oil level warning

    Nige , I found the level sensor and replaced it . Sure enough that was the culprit . temp was'nt that high in the tank zone . Once I unplugged the sensor it fired the alarm so I knew I was on the right track . THANK YOU!!! for the input ! I lucked out , milton cat had sensor in stock in milford...
  12. D

    CAT 950 F II hydraulic oil level warning

    Ok , i had a chance to do another run test . Its light # 12 and a quick scan with my cat phone with flir is showing hot oil on the filter under the cab . I will try to upload the pics ? No code present , just light and buzzer with warning light flashing
  13. D

    CAT 950 F II hydraulic oil level warning

    Ok , here's the sn# 8TK05288 . I apologize for not getting back sooner . Light is the hydrolic oil level , could be number 12 ? not certian . If the pictograph was showing I would be certain. Thanks !!!
  14. D

    CAT 950 F II hydraulic oil level warning

    I will get the sn #, sorry I don't have it handy . Thanks for the quick responses !
  15. D

    CAT 950 F II hydraulic oil level warning

    My 950 is throwing a warning of low hyd oil ? Oil is full and I just replaced the filters , wondering whats involved in getting to the level sensor ? I see a sensor on the lower region of the tank , looks more like temp by location ?
  16. D

    Looking for parts New Holland EC270

    Hello all , I need to locate a regenative valve on my 270 . It threads in on the control block . Numbers stamped on it are 6102.10/100 . Any parts machines or such info would be great . Thanks for looking !
  17. D

    New Holland EC270 control issues

    I was not aware of a screen in the tank . Thanks I will look into it .
  18. D

    New Holland EC270 control issues

    Up date , I discovered the hyd oil level was a bit high ? Over filled by accident likely ? So I decide to look at the filters which I replaced when we got machine . I had new ones left over from the 12 we had . The filters were badly restricting very dirty . I put new filters in today , one was...
  19. D

    New Holland EC270 control issues

    Monroe tractor in Worcester,ma .There are other branches . Case excavator dealers can help ,also new holland
  20. D

    New Holland EC270 control issues

    I know the O&K hurdles all to well . l did find a local dealer who is able to order parts . So now I’m going to check out my restrictor valve and proceed from there . The RH 23 must be a beaut !
Top