• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. C

    Case 1845c radiator replacement Guide

    Need to replace the radiator on a 1845c. The radiator looks great, but leaking on an inside core i guess, I assume fixing it would cost more than replacing it. I see them priced from 199 to 800. ebay/amazon. Any recommendations where to buy or what to look out for. Most likely will buy off...
  2. C

    Deestone D304-Skid Steer 10-16.5 E/10PLY ANY GOOD??????

    Need 2 skid tires 12x16.5 Looking at Deestone cause they are much cheaper than others. But of course while it appears to be a good value from a price point, are they any good. Not much info out there on these.
  3. C

    580k Hydraulic oil and transmission filter replacement

    On the converter housing is a fleetguard hf6555 filter For the hydraulic filter checked the web has its as 84239751, this one is 75.00, cheapest price i could find. Is there a cross to anther filter? or site that has them cheaper? thanks
  4. C

    best way to protect hydaulic hose 580k Extendahoe hoses

    Will be using Slip Plate 3 to lubricate the extendahoe.
  5. C

    best way to protect hydaulic hose 580k Extendahoe hoses

    Got it off, was not easy, I have seen the videos where it just slides off, had to pull this off with the tractor. The book say not to grease, this was greased at one time and was more of an adhesive than a grease now. The pin was also stuck, thought I would have to cut it out. But with some...
  6. C

    best way to protect hydaulic hose 580k Extendahoe hoses

    I am replacing the extendahoe hoses, sorry for the confusion. The hoses in there now are rubber exterior , is it recommended that I go to braided exterior?
  7. C

    best way to protect hydaulic hose 580k Extendahoe hoses

    God way to do it, while I don't have a tree I'll find something to keep it up thanks
  8. C

    best way to protect hydaulic hose 580k Extendahoe hoses

    hose above the pin, good point would have missed that. I found some original case hoses from ebay but no protection for them. I did not see a PN for that item in the parts book. Any aftermarket product? Also which way is recommend for extendahoe removal: 1 take of exhoe leave exhoe cylinder in...
  9. C

    best way to protect hydaulic hose 580k Extendahoe hoses

    Have to change the extendahoe hoses on a 580k. Looks like it had some type of canvas material protecting the hoses. Is there a better product out there? its at the joint of the crowd/boom, so constantly flexing.
  10. C

    1845c Fuel relay PN

    Great thats the one, thank you for the info.
  11. C

    1845c Fuel relay PN

    My relay is 4 pin. Nothing was written on the relay, My assumption was this part is common to one of the most popular skidsteers of that era. I will find one NP thanks
  12. C

    1845c Fuel relay PN

    There is a fuel realy, there are several different wiring versions of this machine. Mine has the relay. Site will not allow me to upload pics. it is a 4 pin relay
  13. C

    1845c Fuel relay PN

    Need to replace the fuel relay on an 1845c. Looking for the correct part number. Good site for this part?
  14. C

    Dump liner attactment ideas

    Had to cut it down due to expansion. elongated the holes as well. I was not sure it was going to work better than the steel bed, didn't appear to be more slippery, but it works great, should have done this sooner.
  15. C

    case580k transmission

    I tried this on mine and you cannot turn the wheels. By process of elimination, being that 4th gear works fine, the shuttle is good, ring/pin is good, planetaries are good. just leaves the gears and intermediate shaft and forks. Not sure why coasting would damage them.
  16. C

    Dump liner attactment ideas

    The bed is only 4x8 and purchased a 4x8 sheet, fit nice but I am concerned about expansion. I used stainless round head screws at top and sides. Not sure z strips would work in this application, but if it expands may have to cut it down and use. Hope it works, It was this or a vibrator, this...
  17. C

    case580k transmission

    sounds like 2 gears are engaged at the same time. I Will try this with mine, Lift the rear wheels off the ground, put in 3rd, engine off, and see if the wheel will turn by hand maybe be hard, I believe should turn, again will try on mine to confirm. if it does not turn then it's a gear fork...
  18. C

    Dump liner attactment ideas

    Putting in a UHMW liner in an ez dumper. Looking for attachment ideas. Not much on the subject. Not going the adhesive route. So will be mechanical fasteners. I see one person did z strips. Since the most, i can load is 3 ton, and the liner has a low coefficient of friction, thinking metal...
  19. C

    580k hydraulic cylinder rebuild, getting rod back in the cylinder...

    Thanks for all the replies, I had to buy a used one, 750 rebuilt, drove down and got it. Will bring the bad one to a shop down south with cheap rates let them try now that time is not a factor. I am surprised there is no dump truck forum here?
  20. C

    case580k transmission

    if it moves in 4th, both forward and reverse then the ring/pin is ok, shuttle as well. when you put it in 1st does it move, or engine bogs down when you try and move? Or it's like its in neutral? Har far did you coast?
Top