• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. J

    980H Transmissions issues

    Hey guys I'm working on my 980h JMS03132 so far I haver had hydraulic, steering, and braking issues since I bought it last winter. Now I'm on to the transmission issues haha. the machine ran great all day saturday no problem all day. monday warm it up and grease it and go to dig into some...
  2. J

    980H Pilot Pressure Problems

    Hi I have been working on my 980H for a few months now trying to get it right for the spring season. i have asked a few question on here before about it. And I could use some more help. serial number is JMS03132 Im having problems with the loader controls. They usually work fine but some time...
  3. J

    Komatsu 450-3 transmission shifting issues

    I recently bought and put a new engine in my friends 450-3MC loader. The machine has 13,500 hours on and it has been sitting with no engine for 8-10 years. when it was parked back in 2010ish everything ran fine I know because i remember running th e machine. I've had 4 of these 450-3 over the...
  4. J

    980h radiator fan stopped turning

    Hey guys Im having some trouble with machine overheating. The hydraulic fan doesnt turn somedays. Today is the 4th or 5th time i have had this happening. The machine will run fine for like 2-3 hours and then ill notice the engine temp gauge start to creep up. So i get out of the machine and see...
  5. J

    980H No hydraulics on start up

    i have a 980h JMS03132. it has 12,000 hours on it. i bought it used 2 months ago. i have the half wheel command steering. now in the colder weather when i start her up every morning I can't steer or move the hydraulics. it takes like 20 minutes of idling till i can steer. and then another 10-20...
  6. J

    CTL 70 won't move

    I bought my friends CTL70 which had a bad engine. i went through the entire process of swapping in a brand-new engine. it run strong now and is all back together but i can't get it to move now. I have no track movement and no hydraulics. So far i have bypassed the lap bar and jumped out the...
  7. J

    WA200-5 hydrostatic transmission problems

    my wa200-5 started acting up last week. the machine beeps when you turn the key on. after learning how to read the codes i found these: DX19KZ DX20KZ DW26KZ The machine is still drivable. its operates in forward and reverse. it doesn't shift gears anymore and also doesn't have much digging...
  8. J

    Wa 450-1 transmission seal replacement

    i have a Wa 450-1 with a transmission leak. The leak is coming from the main seal where the drive shaft that connects the engine bell housing and the tranny. on the tranny side is where the leak is. lets just say its very tight to get in there. first question. this is a very old machine with a...
  9. J

    CASE 1080B track motor brake assembly.

    helle guys, i was wondering if anybody know where i could get a new or used brake assembly for a track motor. its discontinued by case so thats out obviously. hoping someone has a parts machine or a spare laying around somewhere. If any one has any tips i would really appreciate it. this...
  10. J

    L90D Tranamissoin low oil and power

    So my L90D gradually leaks oil from the top of the transmission into the drop box. It doesn't leak any oil to the ground. the oil gets lower on the high side dip stick and the drop box is overflowing with oil. so logically i have just been keeping an eye on it and adjusting the levels week by...
  11. J

    955H turbo replacement

    i have a great running 955H 60A2635 track loader, except the oil seal in the turbo went. cat says they can't get a turbo for the machine because its out dated. i believe the cat turbo number is 7M0166. any body know of good place to pick up a new turbo? i really rather just replace it with a...
  12. J

    cat 988a radiator 87A prefix

    I'm looking for a radiator for a 988a. used one preferably. if any one has a good part number or a source of these old radiators it would be greatly appreciated for some help tracking down a fitting radiator. does anyone know if radiators from other machines with fit into a 988a 87A prefix? i...
  13. J

    Cat 955h 60A transmissoin oil

    i have a cat 955h see:60A track loader that i just got running after it sat for probably 20 years. the machine started and ran great but at first the tracks had no movement but you could here the engine bog down when you moved the shifter. the converter oil gauge said it had great pressure...
  14. J

    L90D fuel pump timing

    i have to send out my injection pump for some work. I know i need to put the motor and pump back in time when installing the pump. Also know that im supposed to have this position indicator timing light position tool from volvo to do this aswell. I dont have this tool and im not spending 780...
  15. J

    Volvo L90D hard starting

    hi guys i have a 2000 L90d that only wants to start when it is ice cold. but even then it takes about 8 seconds of cranking until u feel a "bump" in the throttle pedal. once warn the machine will not start at all with out ether. if you crank with no ether then it will just crank forever, no...
  16. J

    D8H worth and what it takes to start.

    I recently have bought some land and it has come with 5 very old D8H dozers. one runs great while the rest have sat for a about 5-10 years. from what i understand they all ran fine when they were park but they just weren't used. 4 of them have the hydraulic blade while 1 has the cable lift...
Top