• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. B

    1974 Case 580B Stabilizer Leg valve spraying oil.....

    Awwww shoot.... I'm just getting back to this problem and it looks like Case has changed their webpages. (Not like I knew the old ones). I will have to rebuild this stabilizer valve. I've pulled the one valve out of the body too many times and the o-rings and seals are shot. Where on the new...
  2. B

    How to find Case 580B CK front counterweight on Case Parts Page...

    I have a rivet hammer and 175psi from the air compressor. The pin has a dimple on the one end. I hit it full blast from both sides for a few minutes each try. My next thought is to weld on a 1/2" socket and try to get it rotating with a impact or a breaker bar. Otherwise I'll have to drill it or...
  3. B

    IH TD20 Series 200

    I have a 1959 IH TD-15 I pulled from the Arizona desert last year. It is quite a unusual beast. Starts on gas (not a pony motor, the engine starts on gas) and when it warms up you push in a lever and it shuts off the ignition and carburator and switches to a diesel injection pump. I'm close to...
  4. B

    How to find Case 580B CK front counterweight on Case Parts Page...

    Thank you for pointing me in the correct direction. I was able to pull down the counterweight. Still can't pull that axle pivot pin with both circlips off it. It is stuck in another bushing i believe. Even with Big F Hammer it is not coming out. Im' almost thinking of using a plasma cutter or...
  5. B

    How to find Case 580B CK front counterweight on Case Parts Page...

    Yes. Bingo! I cant figure out how they organized this Case parts manual yet.... Bart D. Hull Laveen, AZ
  6. B

    How to find Case 580B CK front counterweight on Case Parts Page...

    I don't get how they arrange stuff on that site. I'd like to look at the parts schematic so I know how many bolts to pull to drop the counterweight that doubles as a front axle pivot pin mount. Where is the safe lift points if you can't use the counterweight. (Which is what I'm using now as the...
  7. B

    Case 580BCK How to remove front axle pin...

    Wish they showed the bushing and housing the pin went into. Lots of dirt and oil around the pin.
  8. B

    Case 580BCK How to remove front axle pin...

    Yes, that's the one I'm talking about. How do you get to the backside? Should you have to pound it out or try penetrating oil? Bart D Hull Laveen, AZ.
  9. B

    Case 580BCK How to remove front axle pin...

    Darn, it shows nothing about the front axle pivot pin. Bart
  10. B

    Case 580BCK How to remove front axle pin...

    Does anyone have a 580 BCK service manual?
  11. B

    Case 580BCK How to remove front axle pin...

    I have a 1974 Case 580 BCK. I have the axle off and I can press out the bushing in the axle but how do I remove the pin? The pin is badly worn to where it was moving front to back and broke the 3rd mount off the oil pan, luckily not opening up the pan and dumping the oil. This pin is my last...
  12. B

    TD-15 project - Coil is so hot I can't touch it, no spark...

    Still not happy with the spark. Seems pretty weak. I have a good vacuum (I'm putting my hand over the intake pipe just above the carburetor, the pipe was cut by someone previously and joined with a rubber tube). I pulled the float bowl and cleaned it, the float needle was cleaned, and the...
  13. B

    TD-15 project - Coil is so hot I can't touch it, no spark...

    Turns out polarity is positive ground and everything works right when positive is grounded. Had no spark before, now have healthy spark, turns over faster and even the lights work. (Since when do filament lights have polarity? Must be in the light switch.) Still can't get diesel air...
  14. B

    TD-15 project - Coil is so hot I can't touch it, no spark...

    Just replaced points, condenser, rotor, cap........ .020 gap on points, changed battery to positive ground (this is what I believe it should be, manual hints but never tells you straight out.) Cranks over just fine (seems faster on positive ground). Should coil ever get this hot? I'm...
  15. B

    Replacing parts in backhoe valves - 580B

    Thank you everyone..... This is posted in two posts (Oops, didn't mean to do that.) Based on this post and the other post, I don't have to pull the valve apart, just the bottom cover on one spool. (and I'll do that over a clean white bucket.) It is more than likely just one bolt that broke or...
  16. B

    1974 Case 580B Stabilizer Leg valve spraying oil.....

    Thank you everyone..... This is posted in two posts (Oops, didn't mean to do that.) Based on this post and the other post, I don't have to pull the valve apart, just the bottom cover on one spool. (and I'll do that over a clean white bucket.) It is more than likely just one bolt that broke or...
  17. B

    Replacing parts in backhoe valves - 580B

    Hmmmmm, Interesting day today.... I pulled up on the valve in question and it actually pulled the spool 1/4 of the way out and then I pushed it back and it seated correctly. Now now leaks and it works properly up and down. Of course this means there are parts missing on top of this spool that...
  18. B

    1974 Case 580B Stabilizer Leg valve spraying oil.....

    I have everything but a Parts Manual. Can anybody upload the pages for the stabilizer valve assembly? Thank you. Bart D. Hull Laveen, AZ
  19. B

    1974 Case 580B Stabilizer Leg valve spraying oil.....

    Where do I find part numbers for the individual seals? I looked on the Case parts page but it just shows a complete valve assembly. If I'm gonna pull it I'm going to replace all the rubber as it goes to heck in Arizona, it was built in 1974 and it's not fun to get to....... Bart Laveen, AZ
  20. B

    Replacing parts in backhoe valves - 580B

    When you say seal kit, do you mean a prepackaged kit of seals to rebuild the entire stabilizer leg twin valve assembly? If so, where did you get this kit? If I'm going to pull this turkey I want to do it once and do it right.... Bart Laveen, AZ
Top