• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. J

    2012 Case 621f leaking from axle vent.

    That is what I'm afraid of.
  2. J

    2012 Case 621f leaking from axle vent.

    I haven't check the axle oil level And I did have to add hydraulic oil to it but it has a leak on the 4 in 1 bucket cylinder and when they but the forks on they lose fluid also. I know exactly what your saying about the brakes being similar to cat because we ran into that issue with a cat load a...
  3. J

    2012 Case 621f leaking from axle vent.

    Hello I'm looking for any info on why and what needs to be done for this issue. So fluid is coming out of the breather on the front axle and I noticed oil under the rear of the machine leaking out also. The machine has a little over 2,xxx hours on it and never has been a problem.
  4. J

    John Deere 500C Transmission/Hydraulics Problems

    I'd start by trying to find a parts manual on the break down of the machine. I have one and will check later.
  5. J

    Looking at a john deere 500 series a backhoe

    These are a little heavy for a flatbed unless it's rated for 20tons. How dosent it start. Need battery's or try hitting the starter or replace. Or dose it just crank.
  6. J

    Who's still running a jd 500c or any 500.

    Let's try and bring some life back to this.
  7. J

    Looking at a john deere 500 series a backhoe

    What problem are you having?
  8. J

    Who's still running a jd 500c or any 500.

    Any more input?
  9. J

    Who's still running a jd 500c or any 500.

    Sorry for late response. As far as to look at its the same as any other machine. To me there are no none problems with these machines. They are light in the front end tho when using it on hills.
  10. J

    Newbie for a backhoe

    What is the closes dealer to you? I'd start with that when picking a machine. Case 590 is a good machine. I don't think there is much of a difference between a 2 or 3 nothing that noticeable anyway. Try looking at deere and cat they make great backhoes to.
  11. J

    Who's still running a jd 500c or any 500.

    There has to be more input or even question.
  12. J

    Komatsu PC200-7 Will Not Crank

    It dosent matter if there is power going to the starter. The starter dosent sound like it is cranking the machine. If there is power to the starter than you eliminate pretty much everything but the actual starter. Just saying.
  13. J

    Komatsu PC200-7 Will Not Crank

    Hit the starter. Or pull it and hook it up to power and see if it spins.
  14. J

    Who's still running a jd 500c or any 500.

    That's awesome! Thank you
  15. J

    Need some purchasing advice

    Either machine wood be good. I think the deere might have a little more grunt behind it.
  16. J

    JD 500C - Outrigger leaks down

    To bleed air you have to crack the fitting until fluid comes out and bubbles stop. But something is telling me it's not air. We had to replace the same hose and no problem. You might have to rebuild it. I do suggest calling your local jd dealer and asking them.
  17. J

    JD 500C - Outrigger leaks down

    Nice machine. I have the same one and I also started a post about them. The outriggers go down slow on my machine after sitting off for a while. But I have notices that after I had one rebuilt because the seal blew out it dosent go down as fast as the other. Now dose this happen while the...
  18. J

    Who's still running a jd 500c or any 500.

    2 6 volt batteries connected in series give 12 volts for the electrical system. The solenoid switch part # is AR90070 its a kit.
  19. J

    Who's still running a jd 500c or any 500.

    I think so. But I'm not sure. I will check when I get home for you. Why do you ask?
  20. J

    Need to buy Komatsu PC300-5

    They are good machines just on the older side. Hard to find good old machines that aren't going to need work.
Top