• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. 1

    T190 troubles

    so I paid a guy to rebuild my t190. It smokes when I pick it up. He said the fuel pump was bad so I replaced it, still smokes I noticed the turbo I bought was the wrong one the outlet faces forward, it was dumping oil in the intake, I rerouted the line so it wasn't crimped. Seemed to improve. It...
  2. 1

    T190 coolant issues

    After operating machine for about 45 minutes the coolant reservoir bottle is still cold also I'm not getting a temperature reading when I squeeze the upper radiator hose that goes to the Waterfill neck it's pushing water up into the reservoir I cannot squeeze the lower hose because it has a...
  3. 1

    T190 rear track idler

    is there a trick to get the primary bolt off of the rear track idler, I've got my m18 Milwaukee brushless impact on it and nether side with budge, was beginning to wonder if I'm doing something wrong. Also does anyone rebuild theirs or just but the assembly new
  4. 1

    Options for installing liner

    looking for suggestions I just bought a liner for my l9000 ford tandem dump truck. The floor is gonna need some work in the near future but as it is I have a job to compete with the truck as is. What's the best way to secure the liner... a local guy told me use 1/2" bolts and bolt it in. I've...
  5. 1

    How heavy is too heavy

    I'm in the market for a mid sized excavator specifically a kobelco bladerunner. I want to be able to move it on a pintle hitch trailer behind a l9000 tandem ford dump truck. Can it be safely done considering the machine to be a kobelco ed190 approx weight 45k
  6. 1

    Kobelco ed150 bladerunner

    I'm looking for experience from guys who have ran this machine. I started out on a bobcat 325x machine, small, underpowered but could handle most small jobs. Next was an abused kobelco 200lc powerful machine no complaints but too large to move around a jobs easily. I really want a machine that...
  7. 1

    Hope I don't get burned for this

    I've been wondering if anyone has ever added a blade to the front of a 200 series trackhoe. As I'm cleaning up this land I keep thinking how much easier this would be with a blade, basically a half blade similar to that of the mini excavator
  8. 1

    Tubes or other options

    just bought a m18 grease gun and I'm curious if you guys are loading your grease tubes via a bucket or are you buying the tubes ready to go?
  9. 1

    Sk200lc kobelco Hydralics safety switch

    I'm having some trouble machine runs perfect but today I'm operating and I loose all hydraulic function I assume a stick has raised the safety lever I look down and one of the two wires that go to the solenoid itself is smoking, I turn the machine off replace the wire as to it had been replaced...
  10. 1

    1840 case starting troubles

    long story short bought a flooded case 1840 rebuilt the motor and i'm assuming that the injector pump timing is what is stopping me from starting the machine. I have done more research than i care to think about which has led me here. My injector pump does not have a keyway which is how i have...
Top