• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. T

    case 1845c intermittent full throttle

    i have a customer with a case 1845c. i have trouble getting full throttle out of it. i have adjusted the throttle stops but no help. evey now and then it will go to full throttle. i'm suspecting the injection pump. it has new fuel filters and air filters. i did check lift pump pressure and i...
  2. T

    Case 75xt experts

    i've got a case 75xt that is fine when cold, but once the hydraulic oil is good and hot the unit won't turn when you move the lever's in opposite directions. also when trying to turn the green light on the display goes out and the parking brake light comes on. but driving straight it fine. any...
  3. T

    Case 621b no brakes

    i have a case 621b w/ no brakes. took some pressure checks at the brake valve next to the brake hyd. pump that is powered off of the engine. i had 250psi at idle and 1000psi at full throttle. anyone know if these pressures are correct? where do look next? feels like i have no pedal.gotta give it...
  4. T

    case w11 parts/salvage yard

    looking for a good used hydraulic two spool valve for w11. the parts i need aren't available anymore.
  5. T

    Parts for fiat-allis fr100

    I'm looking for a steer orbital. New is no longer available. The shaft is grooved and won't seal up a new seal. Anyone no of any used?
  6. T

    No hydraulics on a Case 621

    I have a Case 621 that lost pilot pressure for the lift. The steering works fine. I only have 25-0 psi of pilot pressure at idle. After troubleshooting I found the two check valves that connect the hoses from the steer pump and hyd. pump to the pressure reducing valve trashed, the ball and seat...
  7. T

    Case 420 skid steer no start

    i've got a Case 420 skid steer that died today. i'm not getting power to starter solenoid and fuel solenoid, i've traced the wiring back to my relays. i've got a negative to the relay but not my positive to switch the relay. Any ideas? Anyone have a wiring schematic they can post or email me...
  8. T

    Oil or fuel in radiator on a komatsu pc220lc-6

    i've got a PC220LC-6 that looks to have oil in the radiator. its smells a bit like fuel, but i may be mistaking it for oil. has anyone else seen this? does this machine have a engine oil cooler on the oil filter?
  9. T

    case w11 problem

    i've got a case w11 that started have a drifting loader arm problem. did some investigating and found the lift spool sits higher in the valve than the tilt spool. anyone had those valves apart? any idea what i might run into when disassembling?
  10. T

    Wheel loader salvage yard

    Anyone know of any salvage yards for wheel loaders and other construction equipment
  11. T

    Trojan wheel loader?

    Looking for a parts distributor for trojan wheel loaders.
  12. T

    case 1830 electrical schematic

    looking for a wiring schematic for a case 1830 skid steer.
  13. T

    Help!!! Case 621b trans problem

    :Bangheadi have a case 621b with no 1st and 2nd gear in forward and reverse. i have 3rd and 4th gear. i check power to my 5 solenid valves on the trans valve. in forward i lose M3, in reverse i lose M1. i also tried a good used for/rev. lever assy. and got the same result. i have talked to 2...
Top