• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. R

    324 intake air sensor problems

    I could do some fooling around. I think turbos and injectors. Very basic stuff. Couldn’t program anything. I think Deere is concerned about people deleting the power units. I honestly don’t know the version number. When I try to logon online it just sends me a nice message and saying not going...
  2. R

    324 intake air sensor problems

    I have the volt meter. I actually want an amp clamp. But we have other stuff to diagnose and the customer service advisor was horrible. I needed a payload for a moisture meter for our 9670 and had to call the dealer. I know it’s their software and hardware but it’s a payload for a moisture...
  3. R

    324 intake air sensor problems

    Code is active at start up. Thanks for the help. Do you know what is a good diag tool other than ahem copies of service advisor or where you can get them?
  4. R

    324 intake air sensor problems

    Thanks, I must have missed the Z. He says the code is there all the time. I don’t remember having to reset these. You fix the problem and it clears itself. Unless there is wires touching I don’t know what else it can be. I’m assuming this is all on can bus. He replaced the sensor. Didn’t change...
  5. R

    324 intake air sensor problems

    It is 1LU324JXH2B036269. 324j. Manifold air temp high exceeded 2630.00 Thanks mg2361
  6. R

    324 intake air sensor problems

    324j.
  7. R

    324 intake air sensor problems

    Have a 324k. At least that’s what we will go with til I can talk to mechanic, I’m nowhere near machine. The air sensor on top of engine cover keeps throwing a code 2630.00. Replaced sensor. Still code comes up. Any ideas? And to add insult to injury, we had service advisor for the customer...
  8. R

    2003 isx 400 timing and metering actuators

    Ok thanks. So what would cause my black smoke then? Put new Chinese timing actuators on it and used metering actuators. Is there a way to test them?
  9. R

    2003 isx 400 timing and metering actuators

    Had an engine fire and had to buy an engine harness. Replaced actuators and now it blows black smoke. Shuts itself off after a few seconds. The harness has a plug to go to a sensor on the side of the block beside the air compressor. Can’t figure out what it’s for. But the plug doesn’t match the...
  10. R

    C15 mbn 6nz manuals

    Ok thanks. You trust the material in the book? Specs and that?
  11. R

    C15 mbn 6nz manuals

    Hey I’ve been looking for manuals for the c15 rebuild and wiring/troubleshooting. I’ve looked around and would obviously like free like anyone else but can anybody recommend besides buying direct from cat a manual download or purchase website that is good quality? Thank you.
  12. R

    Split loom y’s tee’s and elbows and breakouts

    Does anyone know where to get this stuff? It’s all over John Deere tractors but got to buy a complete harness to get them. Can find some tees but want 1/4 inch stuff which I cannot find. Any help would be great. Thanks fellas.
  13. R

    4830 sprayer. Park brake and ladder issues

    Yea. Sorry. The machine was out finishing up some winter wheat. Came back to the yard this morning.
  14. R

    4830 sprayer. Park brake and ladder issues

    I have a couple gauges with dr receptacles. What should my pressures be? At idle and wot?
  15. R

    4830 sprayer. Park brake and ladder issues

    So new news. Installed park brake valve. Now it comes somewhat on when the emergency brake switch is flipped to off. Flipped on, says emergency brake is on on the display and it freewheels. lol. And I have no service brakes either. Did change pads and had calipers off to put in new piston...
  16. R

    4830 sprayer. Park brake and ladder issues

    It’s not an exact serial but 2204 I think. Tested the park brake valve. Got magnetism on the coil. Pulled the stem and moved back and forth. 10 amp fuse ok. But everything on the outside of stem was rotten. So ordered valve assembly. Cheaper then stem and coil. Cleaned it up. And bench tested it...
  17. R

    4830 sprayer. Park brake and ladder issues

    So the park brake doesn’t work on this 4830. Flip it into emergency and nothing happens. I’m guessing electrical, because the brake pedal engages the brakes. Not sure how it’s all tied in yet. Also ladder doesn’t go up when you take off and doesn’t drop when you come to a parked condition. I’m...
  18. R

    Who makes John Deere sweepers?

    I went looking for paladin and turns out It’s the same as Deere. Only difference is a sticker. The vrs is meant for a skid steer but we are putting it on a 324. Not the best results. I’m not sure if there is a better hookup.
  19. R

    Who makes John Deere sweepers?

    Have a Bp84c and was wondering who makes them for Deere. The cutting edge on the bucket portion is stickered Paladin. Wondered if they do, I don’t know who they are. Trying to get brushes for it but looking for options and have some from past sweepers, thinking if we cannuse them, why not? But...
  20. R

    5030 engine turning tool

    Yea that would work. Doesn’t have to be fancy. I just need to lock the engine.
Top