anyone know where to get parts for the swing device for this old machine? I took apart the swing device to find some ground up planetary and sun gears. Here are some pics... Haven't had any luck so far from the local Deere dealer..:beatsme.. I wonder if this machine uses the same swing device as some other models? Does anyone have a book?
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
'93 hitachi EX50 URG
- Thread starter rush
- Start date
garieresco
Member
Wow...too bad Man...your most definately in a bind...that stuff is wore.
SouthOnBeach
Well-Known Member
We have the same machine. I'm not sure if any other machines use the same motor... BUT... I think Dad does have a copy of the parts book for it. I could possible scan those pages and email them to you. We've found if you have part # you can get parts. Never been able to find a repair manual for it.:beatsme
-3Doc
Well-Known Member
I have all the manuals on CD for the EX 50u if this is the same. Here is a break down of the swing from the manual.
:canada
:canada
-3Doc
Well-Known Member
My manuals are the repair and tech manuals and operators manual, they don't have part numbers, that is in the parts manual only. PM me and we will talk about getting you some manuals.
junkman-ca
New Member
I have a parts manual for our 50 urg and there is no breakdown of internal parts only a part # for the whole unit which is 4243574
SouthOnBeach
Well-Known Member
I sent you an email to you with a pdf of the break down to the swing motor of an EX50 URG.
Thanks for all your help guys with the part numbers and drawings. This seems to be another dead end though. It turns out even the parts breakdown for the swing motor doesn't list a part number for the actual planetary gears. It only list the part number of the carrier assembly that includes the planet gears and doesn't give any more breakdown of the sub-assembly. I tried at two different Deere dealers and no one can cross reference the part (carrier) to anything they can get their hands on.
The sun gear itself has a part number as does the ring gear, but of course they don't even come up as a good/current part number at the dealer. Its starting to look like I will have get the gears made if I am ever going to run this machine again. One gear maker quoted $4k for a sun and 4 planet gears.Will keep you posted as things unfold.
The sun gear itself has a part number as does the ring gear, but of course they don't even come up as a good/current part number at the dealer. Its starting to look like I will have get the gears made if I am ever going to run this machine again. One gear maker quoted $4k for a sun and 4 planet gears.Will keep you posted as things unfold.
-3Doc
Well-Known Member
Have you tried Leemar Manufacturing for used parts? They are an Hitachi wrecker in our area. 250-248-2611 ask for Joe.
captain charlie
Well-Known Member
ex50 urg manual
hi, is it possible to buy a copy of your manual from you i have purchased a ex50 urg and have only been able to locate a parts book. if you care to email me at c_saigeon@dccnet.com i'm in gibsons.
Thanks for your time
charlie
I have all the manuals on CD for the EX 50u if this is the same. Here is a break down of the swing from the manual.
hi, is it possible to buy a copy of your manual from you i have purchased a ex50 urg and have only been able to locate a parts book. if you care to email me at c_saigeon@dccnet.com i'm in gibsons.
Thanks for your time
charlie
captain charlie
Well-Known Member
i have a copy of the parts book for the ex 50 urg. it looks fairly in-depth. One question though the button on the left control stick is that the horn button.
regards
charlie
regards
charlie
-3Doc
Well-Known Member
captain charlie
Well-Known Member
thanks -3D little different control system in the picture i think the machine i have is a 1992.it has the pillars forward, i had to re-connect the horn and change the fuss. I found a little piece of history (recent) from the richie brothers website, lists a lot of these machines which were sold through richies all over the place. A welder friend of mine attached a thumb and checked out the machine says its in good shape and no cracks at all. He said the weld job is one of the better ones hes seen. i went through Wajax for filters (5) not to bad of a price i think. There is one filter, a hydro filter at the bottom of the tank which is washable. Is it a chore to clean this one. i still haven't managed to locate any manuals and one body seems to know much about it .
ok thanks for your time
charlie
ok thanks for your time
charlie
-3Doc
Well-Known Member
What is the serial # for your machine. I may have the correct operators manual.
-3Doc
Well-Known Member
captain charlie
Well-Known Member
ex50urg
The serial number is 10E – 02386 i think its a 92' judging by the other serial numbers i have come across. That machine looks a little newer, the one i have looks a little boxier.
Tahnks
charlie
What is the serial # for your machine. I may have the correct operators manual.
The serial number is 10E – 02386 i think its a 92' judging by the other serial numbers i have come across. That machine looks a little newer, the one i have looks a little boxier.
Tahnks
charlie
demonthones
New Member
howdy.. just new here thanks...can you explain what precipitated the need remove the gears and motor..i just happen to be working on the same machine yesterday trying to figure out where to add gear oil.. is it the flush plug with the hex key ...the..i think that i was running dryfor along time..what was your experience as your machine failed.. thanks for anything..cheers