• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by stendori

  1. S

    jd 310 sg fuel filter housing?

    ya i know it's not the strainer because when i had fuel issues that plugged the strainer and to keep cleaning it and then finally drain the tank and clean it out w/ new fuel filter. when it did plug the machine would loose power so it was easy to tell. there is an air leak some where to make the...
  2. S

    jd 310 sg fuel filter housing?

    hard to describe with out pic, but here goes. the housing the fuel filter goes in up inside has a plastic washer that looks like it holds in place a almost a spring like washer that has flaps. mine has part of the flaps under the plastic washer and like 3 are not. i have to use a pair of channel...
  3. S

    accessory relay location JD 310

    ya i i knew which one once i realized they call a solenoid and relay one in the same lol thanks it's worked off and on all morning so ill just replace when i have time
  4. S

    accessory relay location JD 310

    well that was what i thought, but i guess i called that a solenoid lol. they claim that is the part that is bad when i'm losing my lights, wipers, 12 volt ports, and it kicks my 4 wheel drive on when it goes out. some times i can just re-start the hoe and it will start working again.
  5. S

    update john deere 310 sg power shift issues

    not when i thought it was an oem part to begin with! no lesson to learn when it's a false advertisement. hence why i got my money back.
  6. S

    accessory relay location JD 310

    owners manual says it's located by the steering column where I'm assuming in the plastic pod where the fnr wire plugs are but there is nothing located that i can see there. it keeps kicking off and on so i wanted to replace it. thanks
  7. S

    update john deere 310 sg power shift issues

    thank you mg2361. you were 100% correct in your diagnosis. new fnr fixed my problem. sorry to have been a pain. thanks for input vetech63
  8. S

    update john deere 310 sg power shift issues

    so after talking to the JD dealer they suggested i switch out the 2 solenoids on the transmission to ty to see if any thing changes before i buy the fnr switch. what is your thought? i did order a new f-n-r switch but i can not return it once i open the box(understandable) so i just want tpo be...
  9. S

    update john deere 310 sg power shift issues

    A in the four pin to C in the five pin in Reverse - no continuity In 1st you should have continuity from pin E to pins A,C and D. C no continuity 2nd, pin E to pins A, B and C. A only one with continuity 3rd, pin E to pins B, C and D. Only D had continuity 4th, pin E to pins B and D. D...
  10. S

    update john deere 310 sg power shift issues

    already re-turned it lol
  11. S

    update john deere 310 sg power shift issues

    checked under the floor boards and found no chaffing at all believe it not to my surprise they all look good. sorry to say my older tester does not have a diode checker but they look nice and tight. it seems funny that when going into reverse it acts like it wants to half engage and there is...
  12. S

    update john deere 310 sg power shift issues

    if its the relay attached to the plastic fender well, jumping the 2 tans didn't do anything. i can hear it click every time it goes back into neural so I'm assuming it's working. out my old one back in to at least have 1st in D&R. could it be any wiring under the machine that i can access maybe...
  13. S

    update john deere 310 sg power shift issues

    i will give it a try. could it be possible that the new fnr switch is the incorrect one or defective? it is the same part no# AT182520 i was told to get and i double checked it in the JD parts manual. the only difference is the new one has an added plastic detent bar where the shifter would rest...
  14. S

    update john deere 310 sg power shift issues

    well i ordered a new shifter thinking after advice from a member that it would fix my problem. the different voltage test a member had me try pointed to this being the issue, but it didn't fix it. what the new part did was to take away my reverse that I had before in 1st(now none in any gear)...
  15. S

    john deere 310 sg shuttle shift isssues

    after talking to my local Deere dealership, they said they have replaced alot of the shifters on loaders and not backhoes but i guess i am starting it lol. thanks for the help. now just got to fork out the $700 for it. have a good day
See more
Top