• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Ray Myers

  1. Ray Myers

    850k track keeps popping?

    I’ll check into that when I get a chance to tear into it
  2. Ray Myers

    850k track keeps popping?

    Not really. It actually was more slack that the other side. I adjusted it yesterday and it didn’t fix it.
  3. Ray Myers

    850k track keeps popping?

    That would make since. I’m normally in sand and red clay. So that may be the issue. It’s just one track that is doing it so that worries me. But I’ll check it for sure. Thank you
  4. Ray Myers

    850k track keeps popping?

    Most of the the time it does it under a load. But it doesn’t do it in reverse. Other than that it’s hit or miss. I’ve even picked it up with the blade and the ripper and it still did it with no weight on the tracks
  5. Ray Myers

    850k track keeps popping?

    Mine is doing something similar to that. I have a John Deere 850K. I seen that one before I posted this. I was trying to see if anyone had this problem with a Deere dozer. I should have specified
  6. Ray Myers

    850k track keeps popping?

    VTRACK C6HDR is what’s stamped on them
  7. Ray Myers

    John Deere 6068 with a lot of blow by

  8. Ray Myers

    850k track keeps popping?

    Not sure, I would gamble it’s prob a cheap set up. It was on the dozer when I bought it.
  9. Ray Myers

    850k track keeps popping?

    I have a 2015 850k LGP with a 6 way blade on it. It has WLT tracks on it. It has around 300 hours on a new SALT U/C,sprockets, and top rollers. It occasionally pops on the right side track at the sprocket. Track tension is good, nothing lodged in it, and I keep the tracks cleaned out. Sometimes...
  10. Ray Myers

    2012 250Glc engine troubles.

    I posted this in the shop talk forum and wasn’t getting much luck so I figured I’d try here. I have a 2012 John Deere 250glc excavator with a 6068ht in it. It has a ton of blow by. The machine itself has 5800 hours on it but the first engine was replaced at 750 hours due to it getting dusted by...
  11. Ray Myers

    John Deere 6068 with a lot of blow by

    machine sn is 1FF250GXECE608466. The other number I posted is the engine serial number
  12. Ray Myers

    John Deere 6068 with a lot of blow by

    PE6068R053250 is the sn. I’m assuming dusting due to when I went to blow the air filter out it had fallen off in the box. In the service notes from Deere. It is also having a hard when it gets below 70. Would the turbo cause a hard start?
  13. Ray Myers

    John Deere 6068 with a lot of blow by

    I have a 2012 John Deere 250glc excavator with a 6068ht in it. It has a ton of blow by. The machine itself has 5800 hours on it but the first engine was replaced at 750 hours due to it getting dusted by a bad air filter system. This engine is showing the same fate. My question is, I can’t find...
See more
Top