• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by OLDDODGETRUCKS

  1. O

    Cat D model skid steer injector Rebuild options?

    I am interested in hearing about anyone out there who has sourced a company willing to service these injectors, weather it be on the solenoid end, or servicing faulty/damaged tips.
  2. O

    Cat D model skid steer injector Rebuild options?

    Has anyone come up with a viable option to rebuild the Denso injectors out of cat D series skid steers with the 3.3 or 3.8 engine (Kubota V3307T/V3800T) ? I checked with the local injection pump shop and they stated the injectors are proprietary to the dealer/manufacturer so they cant get...
  3. O

    Deere 210LJ no 4x4

    Yes the O-rings on the solenoid valve stem are good. The MFWD pressure changes from 0 to 285 PSI when the 4x4 switch is activated and drops back to 0 when its switched off. This tells me the solenoid is functioning properly.
  4. O

    Deere 210LJ no 4x4

    Hello, Looking for some input on a no 4x4 issue with a 210LJ i have. Complaint: No power to MFWD 210LJ T0210LJ890055 I put machine up on stands all 4 wheels and confirmed no power to front tires. Output splines, Driveline, Ring/pinion, axles, Planetaries all OK. Diagnostics completed so...
  5. O

    289D Hydraulic issue

    See attached joystick duty cycle screenshot. I will try the calibration and report back.
  6. O

    289D Hydraulic issue

    Thanks Nige i will check that, No DTC active. Is calibration possible with customer ET or is it a dealer only procedure?
  7. O

    289D Hydraulic issue

    Hello, I have a 289D TAW05949 I am having a strange hydraulic issue with. Machine starts and runs fine, all functions work. At idle and when working the engine is under a load and you can hear the hydraulics under pressure making a strange noise. It is enough of a load to noticeably rob power...
  8. O

    Bobcat E35 RH Joystick issues

    Hello, I purchased a 2011 Bobcat E35 SN A93K13613 and am having an issues with the right hand joystick/auxiliary hydraulic controls. When i got the machine the thumb/aux hydraulics did work but it had the wrong joystick (Non bobcat) and the aux hydraulics light would constantly flash. It was...
  9. O

    Gutless 226B2

    Remain pump and injectors, problem solved runs great now. Old ones were damaged internally from fuel contamination.
  10. O

    Gutless 226B2

    Nige, I checked again today with a better gauge and i have 10 psi to at the pump and good flow. A few more things i tried today... Removed fuel filter housing disassembled and cleaned (no blockage) Bypassed machine lift pump/Tank and ran 12V electric pump from a clean fuel can direct to...
  11. O

    Gutless 226B2

    Hello, I recently picked up a cat 226B2 MJH10834 5300 hours 3024C turbo diesel engine Machine requires glow plug cycle to start when cold (no big deal 5300 hours) Once running machine has low power, very slow throttle response, will bog down with machine moving around unloaded. Will restart...
  12. O

    Deere 35D dies loses power/ground at injection pump?

    Found the main engine ground (the flat braided one) broken at the frame, replaced that and it’s running strong. thanks guys
  13. O

    Deere 35D dies loses power/ground at injection pump?

    The solenoid is working ok, it is a 3 wire (pull, hold, ground). I am losing power/ground to the solenoid in the harness somewhere intermittently and need a diagram to diagnose.
  14. O

    Deere 35D dies loses power/ground at injection pump?

    Hello, I was running my 35D FF035DX234606 Yesterday and it randomly stalled. Fires back up then dies again Randomly after 30 Seconds or so. Checked fuel system all looks ok. When I Ran power and ground directly from battery to injection pump it ran great for an hour or so until I stopped...
  15. O

    287B Engine Removal

    Hello, I have a 287B Serial ZSA04020 cab/AC High flow I need to remove the engine from to diagnose a lower end failure. What is the procedure for engine removal on these? I have done a 257B which wasn't bad, but I wasn't sure if the fuel tank has to be removed on this machine or any other...
See more
Top