• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Jock

  1. J

    Volvo LC60E Trans Problem

    Gday Refitted the old ECU and problem reoccurred. Fitted new ECU and machine all good The dealer that supplied the parts did say all three needed to be replaced together as the software on the old ECUs was too old for the laptop to even recognise them Thanks for all your help Jock
  2. J

    Volvo LC60E Trans Problem

    Gday funwithfuel Got it fixed today. I worked through the machine and it was replacing the last ECU that fixed it. Along the way I found numerous other problems I thought might've been it. Bad earth on the little buzz rail just inside the cab door, battery isolater seized up solid and battery...
  3. J

    Volvo LC60E Trans Problem

    No worries I'll get an instrument panel and wiring schematic Will let you know the outcome Thanks for the info so far Yeh L60E, mistyped the C
  4. J

    Volvo LC60E Trans Problem

    Thanks for the reply, will check it out this month The machine is 1000km away and I only get there once a month so hopefully I can get it fixed this coming month. I'll be armed with three reprogrammed ECUs and some more time. Will run those tests on the instrument panel and check it out Do you...
  5. J

    Volvo LC60E Trans Problem

    Had a look at it today, it has first reverse and first and second in forward. No other gears. The dash is continually blinking reduced computer function, will find myself a book and have a read Reckon it's more than something simple, seems to be some kind of limp mode?
  6. J

    Volvo LC60E Trans Problem

    Thanks for the reply, just had a chat with the operator. Turns out it’s 3rd and 4th Each time theyre selected on the column it throws a fault on the dash. Will have to get the manual and have a read. Still drives fine in 1st and 2nd
  7. J

    Volvo LC60E Trans Problem

    Gday I'll be having a look at a Volvo loader with a transmission fault in the next couple of days, not 100% sure of the issue yet but the operators tell me it's lost a couple of gears and they found ants in the ECUs The ECUs have since been replaced but the fault continues. Are there any...
  8. J

    John Deere 4100 Electrical Schematic

    Not to sure on that one, it does have a 3 cylinder John Deere badged Yanmar for an engine?
  9. J

    John Deere 4100 Electrical Schematic

    Gday Just wondering if anyone has a copy of an electrical schematic to suit a John Deere 4100 hydrostatic trans tractor I'm chasing an issue with the start inhibitor circuit and need to figure out where the relay gets it feed from. John Deere in their infinite wisdom won't give me a...
  10. J

    Jcb 3cx thumb

    Gday Steve, I played with these a fair bit back when I was doing my apprenticeship, few years ago now but. We used to do a lot of mods on the 3CXs tilt hitches, extra circuits, grabs etc. We did do a thumb, from memory we went the way jeff suggested and bolted a 6 port diverter to the top of...
  11. J

    What are your thought on the JCB excavators?

    Can you describe these new fittings? I worked for JCB for about 5-6 years and didn't come across any JCB specific fittings. Unless it's a recent thing (last 3 years). The telehandlers and backhoes ran BSP and some of the mini diggers used ORFS. The only weird fitting I came across was the JCB...
  12. J

    Td20c repower in progress

    The only photos I have of an M11 in an E I resealed on King Island, gives an idea of how close they sit to the radiator and the second photo is a bit shitty but you can see the height roughly. Sorry haven't got any details on torque convertor
  13. J

    Td20c repower in progress

    Try sending an email to Dave at http://www.dlmmachinery.com/ they did a lot of the conversions back in the day in Tassie. Another option is Keith at http://www.jfmachinery.com.au/. Both know TD20's inside out
  14. J

    Td20c repower in progress

    I used to work for the Dressta (previously Dresser, previously International) dealer back in Tassie, Oz. There were quite a few 20's running around down there. The C's and E's had V800's, the H I think had a the M11 Cummins and the latest TD20Ms had the common rail QSC8.3. By far one of the...
  15. J

    JCB 215 Transmission Torque Coverter Question

    Any light weight hydraulic oil is fine for the brakes, as long as its oil based. Do not use Brake Fluid, I've rebuilt countless brake setups due to that mistake. Don't quote me but I'm pretty sure New Hollands run lightweight oil as well so should be fine, I did the brakes in a 5640 the other...
See more
Top