• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Jerre Heyer

  1. J

    Parting out Cat D6 9U dozer.

    I'm Parting out a Cat D6, 9U series. I'm after crank and bearings. has a 90% pony motor, I also have another complete pony motor, Great fuel tank and seat. big parts or small speak up if you need anything. Hate to put it in the box and send it all to the recycler. Jerre 814-881-4093
  2. J

    Looking for 40xt manuals

    Sending you an email. J
  3. J

    Galion 118 Manifold

    We custom build all of ours from the old ones. Standard weld pipe flanges and Elbows. If you don't have any luck and can't do it yourself let me know. Ship up your old one and we can make you a new one. Jerre@jeres.com
  4. J

    Case 40xt

    Check the spring on the linkage on the right side back by the motor.
  5. J

    Looking for 40xt manuals

    Phil know this is a way old post but I have a spare set if your friend is still looking. You can have for shipping.
  6. J

    Case 1840 Bottom Access?

    Cajun 1986, great job on the clean up and replacement. As for the original problem I ended up buying some big crows foot line wrenches for working on these units. 1800 series thru the XT series. Long 1/2 in breaker bar and or a pipe on it. Make sure to put a wrench both sides the line and...
  7. J

    Parting out a Case 40XT skidder

    We are parting out a Case 40 XT skid steer. The tandem pump unit went out and needs rebuilt. It is still a good core. We are using the engine and bell housing and possibly the flywheel for another purpose and the rest of the machine is in good shape. The wiring harness up to the control...
  8. J

    Gehl 4510 Stripped Drive Coupler

    Good to hear. Better than the motor splines.
  9. J

    Anyone have manuals on an old Cat D2 H series wide track. Late 40's - early 50's

    Just picked up an old Cat D2 that came with another piece of equipment. Looking for any manuals on it. Looking at Jen-Sales and some of the others but they are all limited on the D2's. It was a runner in decent shape. Going to have to do a pony motor check and tune up but otherwise ready...
  10. J

    Clark 55b transmission slipping?

    Ryan, thanks for the quick work on the injectors. Those and the tach installed and I can finish trouble shooting. Sounds like you said it's the same progress you had on yours. Good luck in the topsoil. Jerre
  11. J

    Clark 55b transmission slipping?

    Ryan, Thanks for the picts. I'd drop you a few bucks for a copy of the service manuals you have. If you have them in digital You could send them thru sendanywhere.com to jerre@jerres.com and let me know what you need for them. If paper back only let me know what copy costs are and shipping...
  12. J

    topsoil screen plant looking for more income

    Ryan, Use to for road millings, gravel, compost. Just adjust screen sizes as needed. STOCK PILE AND COVER what you can make when it's nice and you will have dry matl when everyone else has none or wet crap.
  13. J

    Clark 55b transmission slipping?

    Ryan or otherwise. Is there a port or ports on the transmission to read the pressure in each gear or just the lower port on the regulator valve? Got valve back on and now have 20 lb at idle on convertor and 50-60 psi at 2000 RPM and 285-300 on the pump at 2000RPM in 1st gear with brakes locked...
  14. J

    Clark 55b transmission slipping?

    mourafetis, Thanks for the info. The Cummins really made it talk but only at higher RPM's We had constant problems with it though. The previous owner had replaced the head gaskets being mis informed about oil leaking into the water being head gaskets. When we got it we went thru the oil...
  15. J

    Clark 55b transmission slipping?

    Inquiring minds want to know. How did you make out on this unit? We just pulled the V378 out of our 55B and put in a 453. Had the same fun with the engine RPM but have it corrected. Unit was a beast before but now 1st seems lower, 2nd is like first was and 3rd is like 2nd. Doing pressure...
See more
Top