• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by hector gemme

  1. H

    Allis hd6 track idler

    Some idler have a plug at the end shaft for refill greasse 1 3/4 lbs
  2. H

    Cat 955k won’t start

    If you have no white smoke when you starting with trottle on or off with the fuel tank cop loosed and if you are missing fuel you could disconnect the rear fuel line from the tank if you have full fuel and if fuel is oké disconnect the front fuel line and put air in if the line is plugged
  3. H

    Cat 955k won’t start

    We bought a 955 many years pass with brinth new motor with new big air filter and small air filter was like new the motor was starting but not easy and was smoking and maybe 30hours working the motor died and the probleme was the small air filter you could removed the 2 air filter and try to...
  4. H

    Cat 955k won’t start

    Did you change air cleaner and precleaner.
  5. H

    Track Adjustment on D7E (original D7E)

    If the greace is going out in coilspring it because the track are to worn and going to far in front and if the greace going out from the end rod and cylinder it should be the the ring and seal probleme
  6. H

    Allis chalmers 7g

    I am still have some used HD7G parts if can help.
  7. H

    Allis hd6 track idler

    You need to removed the idler bracket each side and removed the retainer bearing and these idler have no boushings and about lube some are seal live and some have a plug at end shaft.
  8. H

    955l cat gear shifting/transmission problem

    The streaner in my manual 955u he is not far the pump and he is in round housing
  9. H

    International Harvester T4 Crawler Track Chains- Source?

    I am't sure if he still have some track for these machine but you could check with a dealer wagen drill machine shoulf have same track but longer
  10. H

    955l cat gear shifting/transmission problem

    The plate with 5m5308 it is for 977h 53a
  11. H

    parts for sale

    I am still have some used parts for starting engine for d2,d4,d6,d7,d8,d9 CATERPILLAR
  12. H

    Allis Chalmers M100 motor grader

    The M100 use a 516 motor 6 cylinder 8.5L
  13. H

    Looking for parts for a 1949 Cat D4?

    I send you a air cleaner picture tomorrow or saterdays but no master cluch lever for now
  14. H

    Looking for parts for a 1949 Cat D4?

    I have a air cleaner with the collar and levers governor control and have the lever who connect to the governor shaft and have 2 other rods but not sure if they are the right on and am missing the crank 7f5183.
  15. H

    Looking for parts for a 1949 Cat D4?

    I check todays if am still the main air cleaner and the governor linkage
See more
Top