• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. H

    D7E 48A Pony Motor

    The poney 17a and 48a are't the same model the front and center support is't the same model,the inner water pipe and outside water pipe are different,the exhaust pipe is different and more
  2. H

    Looking at Massey Ferguson 200 Dozer

    Maybe the lining on brake band are brooken
  3. H

    Looking at Massey Ferguson 200 Dozer

    I have 4 brand new stering cluch discs for MASSÉ 200
  4. H

    Cat D7D Non-Running Project

    Yes you need to removed some floor plate to see the brake cluch maybe he need adjustement or change the small lining
  5. H

    Cat d7e d339

    The probleme could be the air filter clogg and about turbo the small filter under should be clogg too
  6. H

    Cat D7D Non-Running Project

    The machine is 17a with d7e motor
  7. H

    7G Allis Chalmers loader running cold

    Do you use a winter fan
  8. H

    steering levers on Caterpillar D6 9U Dozer

    HI Yes it is the adjustement and dont forget to tight the lock nut after adjustement
  9. H

    steering levers on Caterpillar D6 9U Dozer

    The stering cluch lever should have 3 3/4inchs free movement at top lever your machine should need adjustement and the adjustement is under the seat and you need to removed the cover with 4 screw and adjuste the nut on the top yoke ,you need to loose the jam nut and turne the big taper nut...
  10. H

    TD9-91 track loader shifter repair

    Maybe the cluch shaft is rust with the cluch angaged he could need lubrification
  11. H

    International TD8c

    You probably need to removed the filter streaner in front transmission and washed with gas and reinstaled.
  12. H

    941B drive problems

    You better revoved the bearing first and loosed the nut to make sure the sprocket is still press on
  13. H

    Clutch/ brake system MF 3366

    I dismantled a MASSÉ 3366 for parts but do't remember the stering cluch level and am still have some good cluch discs
  14. H

    No Spark from Magneto D6-9U

    Try to turning the coupling clockwise and check if he has spark to the point and if he has no spark put your finger on the coil small brace plate if you recieved a schok
  15. H

    D6-9U Starter Flywheel:What does a stuck/seized Flywheel mean?

    You could check the pinion is't freeze on the ring gear flywell and remove the 2 heads could have some rust in and could be too the magneto freeze
  16. H

    D6-9U Starter Flywheel:What does a stuck/seized Flywheel mean?

    Make sure the starting engine cluch lever is't angaged
  17. H

    Cat D6-9U Electric Starter Question(s)

    I CHECK TODAY ABOUT THE GEAR AND HAVE THE SHEILD WITH THE SHAFT,GEAR, PULY
  18. H

    Cat D6-9U Electric Starter Question(s)

    I should have the housing gear with 47 teeths
  19. H

    Old D4 dozer governor

    HI Am still have some used parts for these machines
  20. H

    Old D4 dozer governor

    You need to engaged the pinion, removed the rear cover from pinion housing and removed the small bolts 3/8 from the big motor plate inspection and removed the governor cover and he should coming out
Top