• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by buckhornspice

  1. B

    Volvo 6110 paver travel issues

    Paver may run for an hour if we are lucky then all travel functions quit until it cools off, wiring harness, computer has been replaced by dealer this problem will not go away, has dealer scratching there heads as well. if anybody else has had similar problems and was able to correct it please...
  2. B

    volvo paver generator

    voltage regulator had blown, removed generator and took to a shop for repairs, they found only the regulator was blown, now for some reason we can't get the voltage we need to stay constant, when you kick in the heat bars it drws down the voltage in half, ive tried to increase it but cannot get...
  3. B

    volvo paver generator

    Pf6110 model
  4. B

    volvo paver generator

    if i remember right its a 2011 or 12 model 5500, we bought it new and have had several electrical issues with this machine
  5. B

    volvo paver generator

    Replaced voltage regulator has 3 adjustment screws 1 for voltage 1 for hz and not sure what the 3 one is for labeled as stab anyone know correct procedure for adjustments
  6. B

    0 4 freightliner w Mercedes no start

    I'm all ears on your trick to get this thing primed, I think we found the culprit, a pin hole in the fuel filter cap, but still having a time to get this thing to run, finally noticed the hole when we had it running off a gas rag, the pump would finally build enough pressure and it would shoot...
  7. B

    Cat 320C display monitor

    I've ran into this on a 320 and a 315, look between the panel right under the monitor floor level, the wiring harness will have a plug, the hot wire either coming into or out has broke at the connector, I've just spliced the wire for the hot lead, the wire you are seeing hot maybe for the...
  8. B

    0 4 freightliner w Mercedes no start

    Did notice while cranking a number or code would flash on the screen ICU 140 not sure what that means
  9. B

    0 4 freightliner w Mercedes no start

    Check engine light does come on checked fuses and ground at battery and fuses, relays in dash pane I don't believe it's throwing any codes if I checked it right
  10. B

    0 4 freightliner w Mercedes no start

    Was running good, shut down , next morn engine wouldn't hit a lick just turns over any suggestions besides a match
  11. B

    cat 320c injection pump

    Injection pump went bad and the man that removed it for me took the gear out with pump, any suggestions on how to get pump installed with correct timing without having to remove the front cover
  12. B

    Kobelco SK 170

    Engine won't start without starting aid cold or hot, you can be running machine and shut down and it will not start without stating fluid, original problem started when #4 injector went bad, replaced all 4 injectors, engine started right up but had severe smoke, found turbo had been damaged...
  13. B

    kobelco sk170

    Here is a little more info, this motor lost #4 injector, with 6200 hrs went ahead and replaced all 4 injectors, engine started up with no problem but had a miss and blowing smoke, found turbo had damage and removed head, when injector broke it had dropped tip into cylinder causing some valve...
  14. B

    kobelco sk170

    Engine will not start cold or hot without starting fluid, runs good once started
See more
Top