walkerv
Senior Member
We flipped the tracks yesterday , probably a good thing we did the masterlink bolts werent very tight.Look at the tracks.
Bob
We flipped the tracks yesterday , probably a good thing we did the masterlink bolts werent very tight.Look at the tracks.
Bob
Have now wonder about the bolts holding the pads on as well!We flipped the tracks yesterday , probably a good thing we did the masterlink bolts werent very tight.
Crossed my mind to be honest, but i have 1 bay with a mack project in it that is only in first couple phases of repair/rebuild it back up to roadworthy standards, and with the rain i have been cycling all other write ups thru my other bay , meanwhile putting a cat 259 back together that i had about completely torn apart finding a massive draw in the electrical system so that it can go back to the chicken houses in about 5weeks for total house clean outs in all 10 houses. Plus i have a mack ch waiting outside that is another project to make roadworthy again. And i found a bad clutch in a dump truck today after i adjusted clutch i couldnt get it on gear, used my wear guage on it and its totally worn out , had to take almost all the adjustment back out of it leaving maybe 1/2 inch free travel to get it to fully disengage, in thinking it has a warped something going on in it . Good thing that one is sorta one of the spares. So im not gonna stress about those pad bolts the lead guy probably wont listen anyways he had no intentions of flipping the tracks when i brought it to his attention, so i brought it to owners right hand man and let him bring it up to lead guy also.Have now wonder about the bolts holding the pads on as well!
Crossed my mind to be honest,
<snip>
the lead guy probably wont listen anyways he had no intentions of flipping the tracks when i brought it to his attention, so i brought it to owners right hand man and let him bring it up to lead guy also.
Thats why i posted it here, even if i have to go thru all my pages i know its here. As hard as it was to find i will probably remember it for a little while . I need to hook up to the cat side of that and see if that is what turns the light on and what parameters its set for . Truck has alot of road time but it is a fuel truck so it idles a fait bit alsoIf you’re anything like me you file a copy of the procedure “somewhere obvious” and then next time you need it you’ve completely forgotten where you put it....
I suppose you might just as well do that. If you're anything like me you blame the wife for everything else that goes AWOL so why should one more thing matter..?I just blame my wife for moving it
Yep, walk around muttering "I put it right where I could find it"
At 80 I spend a lot of time searching for things that " go into hiding", blame it on UFO activity.
I just blame my wife for moving it
My wife actually moves my stuff on me . She can tell me she moved but dont know where too. Gotta clean out my nite stand a few times a year ,and i dont put anything in it . My fuel truck service engine light came on after 550 miles gonna have to steal the laptop with et on it and see how it is setup when i get a chance.I just blame my wife for moving it
I used to save carrier bearing balls for people i knew with slingshots . Dog had bad luck at least it was quick.Wife repeatedly tells me she never touches my stuff, watched her move my stuff and avoid her pile of mess as hers was monumental opposed to mine. So awaited her leave to work, rearranged her piles of 'Stuff' without using hands, moved with feet, a broom and dustpan, even a vacuum head. She a week later was stumble fumbling around ranting of MY Touching her stuff where I looked her STRAIGHT on and told her "Never Laid a Hand on her Stuff". She looked puzzled for a minute then I asked if she may have accidentally put that Stuff away, she went and looked then apologized!!! The piles are in process of resuming growth and another round of game on is about to occur.
This tactic goes WAAAYY Back to when I temp foreman'd a shop in San Leandro for Feld. Was in a rental house, trash pickup was every Tuesday early morning, and every Monday evening the cans went out where a local would let his Sheppard loose to crap anywhere but their yard. Dog would knock down a number of cans to loot whatever was edible then we would have to pickup the stuff next morning or trash truck would just pass by.
Had a Wrist Rocket Slingshot, had access to LARGE Ball bearing balls, got pretty good with it out to thirty or so feet. Well got mad and sat awaiting said dog, was gonna sting that SOB really hard when dumped my can, time came, dog out front can on ground and I drew back in a open door aiming at Front Shoulder. As SOON as turned it loose, Dog's head snapped to look AT ME, bearing hit him SQUARE in the forehead and he dropped like a bad habit.
Well I scurried out, dog was DEAD, skull crushed between his eyes, plopped the carcass in my trash can just MOMENTS before trash truck arrived. Trash dumped, truck moved on and for several days heard neighbor calling for his pup, saw me in yard and asked If I saw him. Looked him straight on and stated last Time saw his dog he was in my trash and we both went back to houses!!!! Did NOT Lie to him!