I got them from Reid Tool, now Essentra. Part # SC-37011
http://us.essentracomponents.com/sh...ble-pull-t-handle-draw-latch---keeper-1078537
And I did make them work. Mine called for a Case # D121323. I had to grind off some rivets and did not use all the parts that came with these.
However I later found more options.
I think that the SouthCo # 37-10-102-10 will also work. Google it...
Brokentractor.com has these for $18 ea but I see some on E-Bay for $8.95 Ea.
I would say this will be the best option, except this may not be a kit that has new mounting hardware.
The cheapest option I found is this.
https://www.rcpw.com/truck-accessories/hood-latches/WJ201U.html
If you want to try these I would call them and ask which one replaces the SouthCo 37-10-102-10
You might want to order just 1 pc to try if you want to try this option...
These rascals are problematic.
Some rubber is stiffer and may not stretch enough.
If the side panel is bent so it's not positioned just right the latch may be loose or tight.
And my ball sockets were welded in place vs. adjustable.
All of these part numbers have different variations for stainless vs steel, different mount etc.