Hey guys
So I have tried this 3 times now over the last couple weeks and just want to give you an update. I painfully Fill swing motor until it appears on the dipstick. Takes forever, maybe due to air?
I’ve been running machine for a few hours and oil overflows out the fill dipstick tube. I drain the oil from the machine, it takes roughly 15 minutes and I capture about 24 to 28 ounces of oil when measured out.
The book calls for 40 ounces capacity, but obviously you never get all the oil out when you do any oil change.
The machine is working and acting totally fine otherwise. I feel like I have a block air relief or vent of some sort? Anyone have any other ideas? Hydraulic oil in the rest machine is completely fine.
Also, there’s a roughly 1/2” pipe with a plug opposite the dipstick, can I fill the oil through there? Thanks