HDMRice
Well-Known Member
Howdy! Name's Mike, and I'm an apprentice Heavy Equipment Technician currently on my 8 month co-op from Centennial College. My co-op term is nearly over and I thought I would share some of the things I have been doing, via picture! I warn you, I am a messy worker...but I'm trying to change.
First things first. Had a D6H with a major oil leak and it was also putting out blue smoke. After a good wash and some investigating I found that oil was coming out of the dipstick, indicating excessive crankcase pressure. I only have some pictures of the rebuilt engine being put in.
Here is a 140h Grader that needed its oscillation joint, lip seals replaced.
My super high tech, fancy pants installation tools.
First things first. Had a D6H with a major oil leak and it was also putting out blue smoke. After a good wash and some investigating I found that oil was coming out of the dipstick, indicating excessive crankcase pressure. I only have some pictures of the rebuilt engine being put in.
Here is a 140h Grader that needed its oscillation joint, lip seals replaced.
My super high tech, fancy pants installation tools.
Last edited: