Hello, I called Volvo today & they don't have anything on the 210-2 apart from parts manuals. What I need is the illustrations of the cab instrument panel gauges/switches. Also the auxiliary hammer pipe work, including the valve block. As l need to know what the boom end hammer circuit flow rate is, as I am fitting a vibro pile hammer that requires a min of 130 LPM. Also whether or not the hammer circuit has a reversable feed. someone has diverted the return pipework to the valve chest to a return direct to tank line. The only control that l can make out is the switch on the right have control leaver, but that is only on/off but wouldn't change the direction of flow, which l need to release the Dawson pile driver clamp.
Where are you in the planet? I can cal you on the phone if you prefer or my number is +44(0)7831096485.
Gary