Rene L. Sandoval
New Member
Joysticks are inoperable. All other hydraulics operate and machine travels.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
John Deere 310sg dead joysticks for hoe.
- Thread starter Rene L. Sandoval
- Start date
Diesel Dave
Senior Member
Welcome to HEF Rene 
.
You have a machine serial number ?
.You have a machine serial number ?
Rene L. Sandoval
New Member
TO310SG957204
mg2361
Senior Member
Did you check your F18 Aux Power Fuse?
Rene L. Sandoval
New Member
All fuses are good and the control switch has power that transfers when toggled.
mg2361
Senior Member
Rene L. Sandoval
New Member
Solenoid is clicking and have no pressure to the valve. Are they known for failing internally? Going to back trace the oil supply to it. Thank you for the information so far!
mg2361
Senior Member
Correction. The solenoid is after the diagnostic coupler, so having no pressure at the diagnostic coupler is NOT a solenoid issue. If you have no pressure at the diagnostic coupler on the pilot control manifold, then I would check the inlet of the manifold. There should be a screen. Maybe that is plugged? Or you have an issue with the pressure reducing valve shown below.
