Good afternoon Nige
Finally got to have a look at the loader i checked the codes there was no active codes on it there is 19 recorded, from what i could understand from the workshop book that didnt show all the diplays one is a ride control fault ,the ride control is working,checked the eight pin plug there is no green death in it sprayed the terminals with contact cleaner put it back together went and did a bit of work with it the bucket level wasnt working checked the harness(Part#271-6452) going to the kickout things for the lift and bucket kick out it had been repaired a coupler time so i replaced that, bucket returns to level now and it hasnt got stuck when lifting up( yet), i dont no if that harness had anything to do with it getting stuck going up or it was just affecting the bucket time will tell once again thankyou for time, knowledge and patience