"o ring face " are used on all new cats smaller hyraulic lines
Yes our test or check ports look just like the oil or hydraulic check ports, some kind of quick connect. Is this the part number at cat.
can get from most hydraulic hose supplyersYes the 6V4144 is the Cat part number for the coupler. My cost is $35.00+/-
Not sure if there is anyone else who makes them, could do a Google search on the part number.
Hello, would I be able to see this file also please? My tack moto hose blew and I'm trying to locate which one to remove.I could send you a 8 page file that shows the drive motors and brake that identifies the ports and explains a lot about them.
I would need a direct email address as the file is too big to post here.
email me at
Or it could be hoses installed incorrectly........The left/right turn issue could be that someone has messed with electrical wiring for the joystick that controls the steering.
The guy I bought this from had a couple hoses reversed and the drive pump was bypassing #14Or it could be hoses installed incorrectly........
See the other two threads. I wonder if the hose installations for the travel are so fcuked up that there is no return path to tank for the oil from the travel motors until you open the return to tank from the lift/tilt implement valve by engaging the lift function..?