• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. M

    T250 acting up

    Yes. Washed out and cleaned every hose
  2. M

    T250 acting up

    So for anyone that saw my other post "T250 problems". I bought a machine cheap at auction that pretty much all of the hyd system was toast. Short answer, we had both drive motors rebuilt, tandom drive rebuilt, and a new gear pump. Took apart the lift block and cleaned, cleaned the tank, washed...
  3. M

    T250 problems

    Been a while but heres the update. Purchased a burnt t300. Pulled the drive motors. Going to reseal them and install them next week. Sent the tandom pump out for repair and ordered a new gear pump. So hope to have the machine back on the ground by the end of the month.
  4. M

    2005 bobcat T300 parts

    Im selling parts to a slightly burnt T300. Has a cab fire but most of the damage was contained to the cab. Machine was a joystick machine. One short nose drive motor, the tandom drive unit, gear pump, control unit, misc lines, the main Boom, lift and tilt cylinders. Let me know what if any of...
  5. M

    T250 problems

    So finally pulled apart the tandom drive and both drive motors. Looks like the left drive motor suffered a major internal explosion as the rotating assembly came apart and sent large chunks of metal through the tandom drive and the gear pump virtually destroying all of the hydraulic systems...
  6. M

    T250 problems

    So a few updates on the T250. First the gear pump is toast. Housing walls heavily scored, and the bottom of the fluid res looks like a sluice box feom Gold Rush. Trying to get the tank out to clean it. The case drain is very clean, 3 small pecied of what looks like flat steel meterial. And...
  7. M

    T250 problems

    I own a shop that works on German cars so we have a good place to work on the machine. Was a major pain to get it inside the shop and into one of the bays. But I downloaded the shop manuals and we pulled the motor yesterday. After replacing the left control panel we were getting 05-14...
  8. M

    T250 problems

    Will that kill the lift and tilt as well?
  9. M

    T250 problems

    Hey Guys and Gals. New to the forum. Been lurking for a while now but decided to toss my hat in the ring for hydraulic issues and see what you guys think. Just picked up a 2005 T250. Got a deal on it but it will not move under its own power. Lots of things going on here but ill start with a...
Top