• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. G

    Takeuchi TL26 questions

    I may have it inwill look tomorrow
  2. G

    Final Drive Gehl CTL75/Takeuchi TL240

    Hey All this is a super long shot, I have an 09 Gehl CTL75 which is same at Takeuchi TL240. I have a Final drive that is toast. I have what i believe is every single avenue to find one. My local Tak dealer is the cheapest at $4000. I was hoping to find a used or rebuilt!! Anyone have anything...
  3. G

    Gehl CTL75 No Pilot Controls

    Hey all I need some help, Been doing some work on 09 GehlCTL75 basically a Tak TL240. I cleaned the egr valve and then decided to just egr delete and remove the egr cooler, as I was advised by someone who does DPF/EGR Deletes. My machine is an 09 and he said the egr is run off the can bus...
  4. G

    CAT 951C fuel gauge

    I will look and see. thank you for your help.
  5. G

    CAT 951C fuel gauge

    No there isnt on this one. it has one of those screen filters but that is it.
  6. G

    CAT 951C fuel gauge

    All; I have a CAT 951C and the only thing these loaders have on them is a fuel pressure gauge. has anyone found a way to add an actual fuel level gauge? I thought about trying to do one that would replace the fuel lid and has a float on it. Any ideas would be greatly appreciated.
  7. G

    CAT 951c getting hot

    Ok Will do. I am waiting on CAT to get back to me on the regulator. As far as the fan and belts go, belts and fan are new, However the fan is blowing out instead of sucking in, is that correct?
  8. G

    CAT 951c getting hot

    Ok here is the S/N 69H4866. Yes thanks for all the help!! Just spent $6700 on rebuild and dont want it to blow something else
  9. G

    CAT 951c getting hot

    I have not but they removed the entire engine when they did the rebuild.
  10. G

    CAT 951c getting hot

    I got this guage from Autozone. Had the same one on a skid steer that I used to have.
  11. G

    CAT 951c getting hot

    Im guessing im calling that the thermostat!
  12. G

    CAT 951c getting hot

    gauge is correct is is aftermarket.
  13. G

    CAT 951c getting hot

    OK so I put a new temp gauge on after i got it so it isnt the factory one. Not sure where the water temp regulator is.
  14. G

    CAT 951c getting hot

    OK so Im not familiar with the water temp regulator. Where is it located on the back of the motor? Also The temp guage is aftermarket, I installed it right after I got it.
  15. G

    CAT 951c getting hot

    Hi all i have a CAT 951C, It has the CAT 3304 motor and juat coming off a fresh rebuild of the bottom end after a spun rod bearing. I had the radiator cooked out during the process. The temp is getting up to almost 240 degrees at times. Water pump seems to be moving water good, just put a new...
  16. G

    1991 Ford Areomax L9000 Clutch Lever

    Hey All I have the Truck mentioned in the title above. The clutch lever is hitting the bottom motor mount. The one that is it is for an International. The part numbers that I have been given are as follows. E7HZ7511C, AND E9HZ7511A Both of which has been discontinued. Anyone have a resource...
  17. G

    1994 Areomax L9000 Running Lights

    Also ford and aterling are the same?
  18. G

    1994 Areomax L9000 Running Lights

    There are only 3 fuses inside the cab in tbe dash where the circuit breakers are and they are all good.
  19. G

    1994 Areomax L9000 Running Lights

    The headlights are on a different toggle switch so at some poi t they have been separated
  20. G

    1994 Areomax L9000 Running Lights

    Ok will do tha ks for the help
Top