• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. C

    Cat challenger 65

    So does anybody know how much shim angle is required to get the front to run true. Right now we have .55 degrees in it. Is this normal or what would be normal for this tractor. The way I understand it is we would need more angle which would be more toe in, since the track is trying to come off...
  2. C

    Cat challenger 65

    These tracks have been on there like this for a while. Just trying to make things right before it leads to problems
  3. C

    Cat challenger 65

    I am having trouble with track alignment. The front left is running on the outside guides up against the tire I have put 2 of the .275 shims in it and it has not helped. Temp difference is only 10 Fahrenheit. Is it normal to shim beyond this. It’s a 7yc00334
  4. C

    Cat challenger 65

    I have a cat challenger 65a and was wondering if anyone has a pdf manual they would give me or let me buy it from them.
  5. C

    D6R XL Problem

    You may also look at the transmission temp sensor. The brakes will drag and give you shifting problems when it has problems. at does have a update where they did away with the 4 speed sensors and only use 2 in the transmission. Was yours updated when the transmission was replaced?
  6. C

    d6r fault code

    thanks nige you helped me solve a transmission problem last year I appreciate it. everybody that responds is greatly appreciated!
  7. C

    d6r fault code

    Thankyou mark. That's what I was looking for, maybe I can get it traced out now if it will stay active long enough. It comes and goes.
  8. C

    d6r fault code

    my 6r is getting a 36.274.03 code which is the atmospheric pressure sensor short or open to ground. I have replaced the sensor and still get the code so it must be in the wiring somewhere. could someone send me the cat et trouble shooting procedure they use to find this problem. thanks in...
  9. C

    case cx 210b pattern changer

    Thanks guys I will give this a try
  10. C

    case cx 210b pattern changer

    I have just purchased a 2008 cx 210b and can't find out how to change the pattern from excavator to backhoe. does anyone know how to do this I figured it was a switch or a valve to change but have not found it. I see in the compartment behind the cab where all the pilot controls come together...
  11. C

    Deere 225clc

    looking at a Deere 225clc and when running it everything seems fine except it does not have enough down pressure to raise machine off ground. is this normal I have never been around one but all excavators I have ran have no problem with this.
  12. C

    Johnson machine receiver

    Has anybody used the Johnson machine receiver? I am needing a receiver for a d6r that I can see from the cab. I do some pads and mainly ponds that are through nrcs and they usually want the top level of the dam to a specific height and I thought that would save me some time instead of having to...
  13. C

    D6R adjustable throttle switch

    thanks for the replies was hoping someone had rigged up a rheostat but I guess it can't be done. yes I can set it on the move its just holding it steady for that 3 seconds. I have put about 400 hrs on it now but still don't like it yes I am use to it just don't like it.
  14. C

    D6R adjustable throttle switch

    I just don't like waiting the 3 seconds and trying to keep your foot steady on the decel if the ground is rough. I am usually in the middle of pushing or grading and I just don't find it to user friendly was hoping someone had an alternative to the factory switch. Besides that and my fuel bill I...
  15. C

    D6R adjustable throttle switch

    Does anybody know if it is possible to put an adjustable switch on the throttle on a d6r series 2. I know you can set it by holding the button and decelerator but it is a pain either idle or wide open. I can't believe this is the best cat could come up with. An adjustable dial would be much...
  16. C

    D6 R transmission faults

    I think I got it I was in 7 not 8 I will give it another try.
  17. C

    D6 R transmission faults

    I had got it from someone else. On the stuff you sent me I could go into the first mode which is mode 7 for the transmission then when going into the submode it would start at 22 and count up to submode 40 then it would kick me back down to 22 shouldn't it count all the way up to 762 so I could...
  18. C

    D6 R transmission faults

    I got my click box made and it worked for clearing codes and seemed to work like it was suppose to but I could not get the trans to calibrate or go to the submodes 762 (I think don't have paperwork here) for checking the speed sensor. I got to mode 7 then entered the submode and it would go up...
  19. C

    4c-8195 box

    Thanks guys I got the connector and pins today ,the connector has #'s on it so it makes a lot more since now . I will get it put together and see if it all works.
  20. C

    4c-8195 box

    wires 1 2 3 4 hook where on which connector
Top