• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. Wino

    Turning a backhoe into a three point tractor?

    Thanks guys for the replies, I figured that was the case, thought I'd ask anyway. I am intending to sell the machine, can't nail down my hydraulic issue. I figured it would be worth more as a working tractor. If I can get $6500 I'll be happy. It has a great running motor. Starting to do a lot of...
  2. Wino

    Turning a backhoe into a three point tractor?

    I have an old Deere 410, I started kicking around the idea of removing the hoe and adding three points. I've noticed a plate in the rear of the trans. Looks like it could cover a PTO. Does anyone know of people doing this? Is it feasible. I got the idea after seeing a road crew with an old 410...
  3. Wino

    JD 410 stuck in my driveway!

    The machine fired pretty easy (twice actually). first time my cap was leaking and there was very obvious pressure behind it. I also noted after uncapping the line a leak developed under the trans around the filter, not real sure where yet because it started to rain on me. Any ideas are welcomed...
  4. Wino

    JD 410 stuck in my driveway!

    I was doing some checking today, my hydraulic pump is back on and, I was able to move the hoe out of the way but, is by no means right. I idled at 3/4 throttle and searched for anything getting hot. The feed Line to the hoe and valve block was around 130f while everything else was 100 to 110. I...
  5. Wino

    JD 410 stuck in my driveway!

    I didn't mention a cooler bypass, I checked a transmission filter relief(seemed okay to me). Reverser clutch control valve sound like a good place to check, because the machine slips in high gear. I also figure I'll attempt to cap lines to circuits to see if I can narrow the issue down some how...
  6. Wino

    JD 410 stuck in my driveway!

    We haven't, they are on main pump or the drivetrain? I've checked what I think is a pressure relief valve, above the trans pump filter. In the manual there is a basic hydraulic diagram, I saw two potential valves on the output side of the trans pump, haven't been able to locate them yet.
  7. Wino

    JD 410 stuck in my driveway!

    I agree, I don't feel I've discovered the cause of the problem yet. I guess I'm going to reassemble and start capping off parts of the system to see if I get a change. Anyone have any good ideas? The grass on that side of the driveway is getting long lol!
  8. Wino

    JD 410 stuck in my driveway!

    I don't have any charge pressure, for awhile I'd have it but, if I moved anything it would fall off. I do have flow(approx. 3-4gal in 30sec). I figured my problem was on the pressure side but, I'm out of ideas at this point:beatsme
  9. Wino

    JD 410 stuck in my driveway!

    Okay, you were 100% correct. Here's the pics, the grooves are all uniformed and look machined. Are they supposed to be there? Nothing really irregular
  10. Wino

    JD 410 stuck in my driveway!

    When I get back out to the garage I'll check it out again, I thought that it was two pieces, and that's the seam you see in the pic. the outer ring catches on the three claws and the center is like a spring loaded tappet. I could easily be totally wrong on this, I've never been into one of these...
  11. Wino

    JD 410 stuck in my driveway!

    Not sure what the valve plate is? If it's the photo that I'm holding a spring loaded valve, it's steel. I think the oil gives it a gold look. it's also multiple pieces, no groove wear of any kind of depth in it.
  12. Wino

    JD 410 stuck in my driveway!

    I finally got to the backside of the pump, I found one defective oring, I'm not real sure it's my problem. This pump doesn't seem to have a lot of hours on it to me. Anything else to look at before I reinstall?
  13. Wino

    JD 410 stuck in my driveway!

    I took a pic of the chewed on shaft, I'm not sure what that's about, doesn't look as though it slipped in the splines.
  14. Wino

    JD 410 stuck in my driveway!

    The shaft definitely turns the crank, it has resistance till I hit the spot with the piston removed. The exhaust valve seems to have a lite spring but, is clean and in good shape. To access the 17-20 parts I would need to remove the rear block of the pump that's held on by 4 bolts?
  15. Wino

    JD 410 stuck in my driveway!

    Thankfully I read this before the 12v test! Don't need anymore problems lol I'm thinking about removing all pistons just because I'm this far, I may as well be sure it's not the pump before I reinstall it. I called Deere today and asked if they could bench test the pump, I got a no on that one...
  16. Wino

    JD 410 stuck in my driveway!

    Everything slides in and out of the bores by hand fairly easy. I'm going to put 12v to the solenoid and see if it's working. I'm beginning to wonder if someone replaced the hydraulic pump not long ago. I can turn the main shaft by hand easily, not sure if that should be? I don't want to...
  17. Wino

    John Deere 510 Backhoe Brakes

    I'm out of ideas, I thought there's a chance it's either a brake rivet or something out of my geared trans pump.
  18. Wino

    John Deere 510 Backhoe Brakes

    If you remove your axles to get to the brakes, would you do me a favor and see if anything associated with the brakes matchs this part? I own a jd 410 around the same vintage and it has hydraulic troubles, and I found this in my pickup screen.
  19. Wino

    JD 410 stuck in my driveway!

  20. Wino

    JD 410 stuck in my driveway!

    pump removed The pump is off, i took some pics of some of the internals. This pump seems to be in really good shape! Not sure what other parts of the pump to look at?
Top