• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. P

    New holland L225

    Serial #NEM473836 Have fault does 1215 & 1216. Cant find any reference to them other than the description. See attached photo we have caught hell chasing electrical problems on this machine. Finally got it all worked out(we thought) programmed the new UCM and were calibrating everything when...
  2. P

    Jd244j throwing a couple of noncodes

    Couldnt find any code definitions or troubleshooting tracks for either of these in the manual. Anybody have any ideas other than ecu replacement
  3. P

    JLG G9-43a fork tilt hoses

    Can I snake those through with out major disassembly? It doesnt look like they'll fit through on the bottom side of the sheave. Just trying to get some confirmation before I attack this. TIA
  4. P

    Towing a bobcat 773G

    S/N 519019939. Have a machine with a bad Engine and nee to move it to where it can be worked on. downloaded the manual but couldn't find how to unlock the drive train to tow it. Can anybody help? TIA
  5. P

    John deere 4039d engine issue

    This engine is in a square shooter SS636. Put a genuine john deere reman engine in with new injectors and i get zero throttle response. But if you grab the joystick & put a load on the engine the injection pump will rev it up to keep the idle rpm. Pinned the engine @ tdc and verified pump...
  6. P

    old square shooter 636 engine (JD4039D)

    Anybody ever pull the engine out of one of these? is there any decent way to do it with out pulling the boom off? This machine still runs (for now) but it over heated and blew the head gasket and now there is a ridiculous amount of blow-by so it wont last long. I got a price on a JD reman engine...
  7. P

    Deere 762B transmission seals

    machine serial # T0762BX746942. Anybody ever done these? are they a straightforward seal replacement or is there something more to it?
  8. P

    Cat 272d wont regen

    Okay folks, serial # GSL00538, I do have ET but I am having a devil of a time getting a comm adapter that will work, so meanwhile is there anyway to get this thing to re-gen on its own?
  9. P

    Perkins 1004-4 in a JCB 504b

    AA build...Lots of smoke & blow-by, burns a gallon or so of oil in a week. Anything I should be aware of before I order an in-frame kit & go after this? I haven't done an engine since college and am wondering if there's any Perkins specific oddities or tips you guys can give me
  10. P

    Genie GTH-844 cranks but won't start

    Deutz BF4M2012 engine. I have fuel at the front two injection pumps but nothing coming from the rear two. Genie manual is no help at all it simply says see engine manual. Haven't been able to find one yet. Anybody familiar with these engines and that EMR-2 governor set up? And is that actually...
  11. P

    S650 Auxiliary hydraulics not working

    I'm not very familiar with the newer machines. I was originally called out for a grapple cylinder leak, I resealed and replaced the 2 hoses for the aux hydraulics. after that the auxiliary worked. Then I did a PM service on it and replaced the drive belt, tensioner spring and pulley. Now the...
  12. P

    skytrak 6042 steer cylinder

    Never resealed one of these. Read the manual and have one big question. what are people using to get these apart? The ZF/JLG socket is almost 1k. Seems a bit steep for occasional use. Just use a hook spanner?
  13. P

    John Deere 8875

    Okay folks any advice on how to get the bottom F*&^^$$ing starter bolt out on one of these? I am about ready to drop the fuel tank out the bottom and see if that gets me there.
  14. P

    Skytrak 6036(serial #10655) frame and fork tilt acting up.

    serial #10655 Had an interesting call. when you work the lever for the frame or fork tilt the only function that does anything is the frame will tilt Left..only. If you try to tilt the forks down the frame goes left some more. If you try to tilt the frame right or the forks up it does nothing...
  15. P

    JCB robot 185 needs a motor

    Anybody have a lead on one?it know offhand of another engine that'll fit with relatively little modifications. Apparently these are like unicorns.
  16. P

    JCB 504B

    So the local dealer is telling me that JCB's service software is down and they cant help me with a little information. I'm looking for a hydraulic system pressure spec and where to check it at and if necessary adjust it. I had a guy ask me to take a look at his 504B (S/n 279804) for a hydraulic...
  17. P

    New Holland parts

    So I need a part that New Holland no longer supports, One vendor told me they had one in the "vintage" warehouse but he couldnt get it another said he called "vintage" and they didn't. Seems to me I heard once that this particular machine was made for new Holland by someone else, Manitou I...
  18. P

    Cat 257 track frame won't budge

    I got one side off and its sliding on the rear torsion bar on the other side but it won't budge on the front torsion bar. I have heated it up a few times. I've been beating on it, had hydraulics pushing on it, a puller on it for a few days. Soaked with kroil. Tried combinations of all of the...
  19. P

    Crane winch with water contamination

    This was left outside awaiting parts for several months and has quite a bit of water in the drum. Other than simply draining and refilling several times anybody have any other ideas on best way to get all the water out? Its a Terex 7.5t(LRT110) crane although some of the badging says its a Lorain
  20. P

    JCB 506B w/ a perkins 1004-4t and a mystery Lucas Pump

    I have JCB with a severe case of oil dilution, no power and a huge blue smoke issue. I have the Perkins manual for the engine in question and I have already replaced the fuel lift pump. So who can give me some guidance on removing this pump. The pump itself doesn't really seem to match either of...
Top