Waring
New Member
My 2014 244J recently and repeatedly puts up a code E3015. Anyone know what this code means? Thanks.
Whats you email address so I can send manuals on it .I have this same code E3015. 2013 JD 244J. Currently ride control and diff lock not working and since they are both related to ground speed to engage them, Im guessing it's in the ground speed circuit. Any ideas how to diagnose and where the sensor is on the machine? Thank you for any help!
Sorry tool king I missed your reply. My email is jnjacres@att.net If your can shed any light on this I would much appreciate it.Whats you email address so I can send manuals on it .
My users manual says Serial number 23290- if that helps.Also post a serial number. There are different manuals for the different serial numbers.
Ok will take a look to what I can find on it .My users manual says Serial number 23290- if that helps.
code E3015
Thank you very much for the info and the manuals. I will dive into it and see what I can figure out. Again....thank you!E3015 translates to an SPN 522401 FMI 05 code which is for the Ground Speed Sensor circuit is open or the sensor gap is too large. The speed sensor is mounted on top of the front axle just in front of the drum brake. I doubt the gap changed unless the sensor is loose so I would be looking for a bad sensor or a wiring issue.
You are very welcome anytime.Thank you very much for the info and the manuals. I will dive into it and see what I can figure out. Again....thank you!
Hey there, I’ve got a E3001 code on my 2007 jd 244j. Machine runs fine just beeps every 3-5 minutes.That is a code 522401.05 for Ground Speed Sensor Open Circuit .I can to try email the diagnostic info.What is your email ?
That code id not coming up in the books. Post a picture if you can.Hey there, I’ve got a E3001 code on my 2007 jd 244j. Machine runs fine just beeps every 3-5 minutes.
Thanks in advance
Rance