1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Winston 20 ton tag

Discussion in 'Trailers' started by JS750, Jan 20, 2016.

  1. JS750

    JS750 Member

    Jan 11, 2013
    Northern Ohio
    In the process of buying a new 20 ton tag trailer. Ready to pull the trigger on an eager beaver 20xpt. One of the dealers here carries Winston 20 and 22.5 ton trailers. Parts and build quality all seem good. The only drawback I see is it only has a 5' tongue where as most of the high end manufacturers have a 6 and the boards are drilled into the cross members instead of the bolt and washer system. Does anyone have any info good or bad about this manufacturer?