dayexco
Senior Member
diesel, i'd remove the one of the dude in the ditch up to his shoulders without trench protection. might have an osha man viewing these threads.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
What sort off machine do you operate?
- Thread starter 385c JR
- Start date
Young James
Well-Known Member
I use a 07 JD 644J to make sand/wash stone. We use this sand and stone for concrete, pipe bedding and much more. This is a screening plant we use where I feed and take away. It separates the stone into 2 different sizes, and the sand drops down into the water where the screw spits it out. The pit is down below me, I'm right on top of everything.
Dirtman2007
Senior Member
- Joined
- Sep 30, 2007
- Messages
- 1,202
- Location
- Raleigh, North Carolina
- Occupation
- Heavy Equipment Operator
385c JR
Well-Known Member
I want it all... :drinkup
Excavators, dozers, motor graders, wheel loaders, tractor etc etc
Bring it on...
I'll be in the same category as Pete.
Got a lisence for nearly everything, and drives what needs to be driven.
Here's some pics.
And its me on the paver too.(A bet with the paving team!)
Check out our website www.mktef.info
And my youtube user mktef shows some videos when i drive the Volvo G976.
Is also a short clip while i drilled a waterwell with the Nemek.
The G976 is my favorite, and i try to spend as much time as possible in it.
Click on my avatar and choose previous posts, i have posted lots of pics here.
And we are a bigger entrepreneur than u can imagine....
Got a lisence for nearly everything, and drives what needs to be driven.
Here's some pics.
And its me on the paver too.(A bet with the paving team!)
Check out our website www.mktef.info
And my youtube user mktef shows some videos when i drive the Volvo G976.
Is also a short clip while i drilled a waterwell with the Nemek.
The G976 is my favorite, and i try to spend as much time as possible in it.
Click on my avatar and choose previous posts, i have posted lots of pics here.
And we are a bigger entrepreneur than u can imagine....
Attachments
Last edited:
TRACKHOE71
Well-Known Member
heres a couple of pics from about 3 years ago the first 2 are of a 365cl and a 345bl. I didnt get a chance to run either of these, on this job a year prior to that i was on the 345 though. the second is a picture of my old pick up and my 330cl. these were all taking in the lehigh valley.
Rockbreaker
Senior Member
Great machines
Great pics here.
Big thank to you mktef for keeping us all safe and restoring what others have destroyed Big:drinkup
Nice look on that pickup Trackhoe...
Seems like you take pride in keeping things in order
Great pics here.
Big thank to you mktef for keeping us all safe and restoring what others have destroyed Big:drinkup
Nice look on that pickup Trackhoe...
Seems like you take pride in keeping things in order
ctkiteboarding
Senior Member
got pics of my little operation, www.gandgllc.com no monsters like you guys:usa but i keep busy, enjoy
dieseldave
Senior Member
That was a couple years ago, I'm sure he's out of the ditch by now. :angel Seriously, that was probably the most dangerous site I've ever worked, and the closest I've ever come to blowing the whistle on a contractor. Arrogance and incompetence don't mix well, and these guys had heapin' helpin's of both. The stories I could tell...:Banghead
dieseldave
Senior Member
dieseldave
Senior Member
dieseldave
Senior Member
We were building dikes for dredge spoil disposal areas. 3:1 inside slope, 2:1 outside slope. The first set of pics were of a baffle dike, on these we sometimes cheat a bit and go steeper than 2:1 if there's not enough material.
bobcat ron
Banned
Must have been easy pushing, just point it in a straight line and move.
JoeS1989
Well-Known Member
I run a Hitachi ZX210LC-3 and a Komatsu PC180LC-7 depending on where im working! With the Hitachi i do a whole range of thing from loading trucks to digging foundations but when im running the komatsu i only ever load our companies Terex XR400 and load trucks!
Joe
Joe
EZ TRBO
Senior Member
biggixxerjim
Senior Member
Really!
JoeS1989
Well-Known Member
Yes really! Im still only an apprentice but i do get to run these pieces of equipment on a regular basis!
Joe
Joe
