Oldboy
Well-Known Member
Hello,
I have the above excavator and the control panel ( dash board readout) and AC and some other electricals wont activate. Some are still working, including the lights and wipers.
I have checked all the fuses and they are good. I have pulled a couple of obvious wiring harness connections apart, they look clean and I re assembled them.
This machine has done this before and then stared working properly again, its a bit of a mystery.
If you have any ideas I would appreciate to hear from you,
thanks
Michael.
I have the above excavator and the control panel ( dash board readout) and AC and some other electricals wont activate. Some are still working, including the lights and wipers.
I have checked all the fuses and they are good. I have pulled a couple of obvious wiring harness connections apart, they look clean and I re assembled them.
This machine has done this before and then stared working properly again, its a bit of a mystery.
If you have any ideas I would appreciate to hear from you,
thanks
Michael.