Tynman
Member
Hello all new to the forum and also new to the backhoe machines. I bought a 2000 JD 410E wheeled backhoe loader and Im just trying to make things work right like wiper motors and lights everything else seems to be working like it should. Just needs to clean off a lot of older grease at the joints and zerks and re grease.
Where I need the help is with the turn signals and hazard lights. Here is what I did and what happened. There is a NON OEM relay in there now (which I was thinking is bad) so with that when I turn the turn switch to right or left nothing happens (no lights) I turn the hazard switch on and nothing happens (no lights) But when I turn the hazard switch on and turn the turn signal switch to the right the left yellow lights turn on solid (front and back) but no blinking. So with the I switched the turn signal to the left thinking the right side lights would turn on at least solid also but nothing. So I went to the auto parts store and picked up a new same size relay that is already there and put it in and the same thing happened. So where would I look or go from here?
Does JD make different relays so you only could use there stuff with there stuff? Or am I missing something?
I can put new bulbs in the right side just to make sure that isnt way the right side dosnt light up. But break lights work and head lights and hoe lights all work.
Please if you guys have any ideas please do let me know.
Thank you in advanced.
Where I need the help is with the turn signals and hazard lights. Here is what I did and what happened. There is a NON OEM relay in there now (which I was thinking is bad) so with that when I turn the turn switch to right or left nothing happens (no lights) I turn the hazard switch on and nothing happens (no lights) But when I turn the hazard switch on and turn the turn signal switch to the right the left yellow lights turn on solid (front and back) but no blinking. So with the I switched the turn signal to the left thinking the right side lights would turn on at least solid also but nothing. So I went to the auto parts store and picked up a new same size relay that is already there and put it in and the same thing happened. So where would I look or go from here?
Does JD make different relays so you only could use there stuff with there stuff? Or am I missing something?
I can put new bulbs in the right side just to make sure that isnt way the right side dosnt light up. But break lights work and head lights and hoe lights all work.
Please if you guys have any ideas please do let me know.
Thank you in advanced.