chansey
Well-Known Member
I Need advice from a hydraulics guru to assist in finding parts for my 1989 Trojan Loader. The 1500Z and 1700Z loaders use the same hydraulic pump. According to Weser Pumpen, the current pump is WP340-3 and only available in Germany at $500 more than I paid for the loader.
The pump flange (pump shaft housing to transmission) had a seized bearing and damaged the housing. The previous owner must have had problems as well because the shaft that connects the trans to the pump is about 1/2" short and the shaft seal just floats.
I'm hoping someone knows where to find a replacement and if not, steer me in the correct direction even if it requires replacing the pump and re-plumbing. The pump is a 3 section pump with a manifold over all three pressure ports. I don't have the pump specs
Additional Pics next page
The pump flange (pump shaft housing to transmission) had a seized bearing and damaged the housing. The previous owner must have had problems as well because the shaft that connects the trans to the pump is about 1/2" short and the shaft seal just floats.
I'm hoping someone knows where to find a replacement and if not, steer me in the correct direction even if it requires replacing the pump and re-plumbing. The pump is a 3 section pump with a manifold over all three pressure ports. I don't have the pump specs
Additional Pics next page
Last edited: